Skip to Content
  1. Products ...
  2. Application
  3. Protection Against Viruses and Bacteria

Protection Against Viruses and Bacteria

Protective clothing designed to shield against infectious fluids, aerosols, or dust. For reliable protection against infection in hospitals, medical practices, emergency medical services, laboratories, forestry, and agriculture.

Our quality management system is certified to ISO 13485 and ISO 9001, and all of our personal protective equipment is developed, tested, and certified in accordance with Regulation (EU) 2016/425. We test all our products in accordance with harmonized standards and subject safety-related features to regular quality controls. We also offer all products as sets and can create custom sets for you.

Tight. Protective. Tested. Safe.

[256] Respirator Neolution®Air, FFP3 Bestseller

Respirator Neolution®Air, FFP3

REF 256
Our innovative filter material for the Neolution®Air respirator mask, made in Germany, ensures maximum FFP3 filtration performance with low breathing resistance and certified particle release in accordance with IEST-RP-CC003.5. The comfortable headband provides a secure fit without causing ear pain.

The highest level of respiratory protection meets medical environmental protection – the Neolution®Air respirator combines FFP3 filter performance with the requirements for Type IIR medical face masks, thereby protecting the wearer from the most hazardous aerosols whilst also protecting the environment from contamination by exhaled air.

The Neolution®Air is made from high-quality polypropylene non-woven fabric with a textile headband free from natural latex and a flexible nose clip. The high-tech FFP3-class filter material achieves an actual particle penetration rate that is many times lower than the legal requirement of a maximum of 1%, and a bacterial filtration efficiency of over 98%. It therefore protects against the most dangerous aerosols as well as bacteria and pathogens. As the mask is designed without an exhalation valve, exhaled air is expelled entirely through the filter material – a crucial advantage wherever not only the wearer but also patients, products or the sterile environment need to be protected. The three-part construction follows the natural movements of the jaw and ensures a constant, secure fit without the need for readjustment. The fabric headband does not put pressure on the ears and offers a secure hold even during prolonged wear, making it ideal for spectacle wearers. As a certified Class I medical device and PPE Category III with Helmke Drum Test Category I, the 256 meets the strictest requirements for both cleanroom and medical use.

Examples of use:
  • • Intubation of patients with infectious diseases (influenza, tuberculosis)
  • • Intubation of patients with infectious diseases (influenza, tuberculosis)
  • • Intubation of patients with infectious diseases (influenza, tuberculosis)
  • • Mold remediation
  • • Processing of powdered chemicals
  • • Livestock management in cases of suspected zoonotic diseases

→
[205] Respirator C-Mask, FFP2 Bestseller

Respirator C-Mask, FFP2

REF 205
FFP2 respirator mask with high filtration efficiency for protection against aerosols and airborne particles. The compact, foldable design and soft ear loops ensure comfortable wear during daily work.

The C-Mask REF 205 offers reliable respiratory protection in a particularly compact and user-friendly design. Its vertically foldable construction allows for space-saving storage, while the soft ear loops and adjustable nose clip ensure a comfortable fit during daily work.

The particle-filtering half-mask is classified as Category III PPE and meets the requirements of protection class FFP2 NR according to EN 149:2001+A1:2009. The mask is made of polypropylene nonwoven fabric on both the outside and inside and uses a filter medium made of polypropylene microfibers. The vertical pleating allows for easy transport and space-saving storage. Soft ear loops made of polyester and elastane make it easy to put on and ensure comfortable wear. The plastic-coated nose clip can be individually adjusted to the shape of the face and improves the seal around the nose. The filtration performance significantly exceeds the standard requirements: In the sodium chloride test, a penetration rate of only 0.03% was measured; in the paraffin oil test, 0.11%, compared to the permissible limit of 6% in each case. At the same time, the mask offers low breathing resistance of 0.4 mbar at 30 l/min and 1.4 mbar at 95 l/min of inspiratory airflow. At 0.43%, the carbon dioxide content of the inhaled air is well below the permissible limit of 1%. All materials used are free of natural latex. The mask protects against airborne pathogens, aerosols, and non-volatile liquid particles up to 10 times the respective exposure limit.

Examples of use
  • Protection against airborne pathogens in the healthcare sector
  • Working in environments with aerosol exposure
  • Work in nursing and care facilities
  • General Safety Measures in Industry and Trade

→
[438/Uni] IsoCoat Chem, Type [6]-B (Uni)

IsoCoat Chem, Type [6]-B

REF 438
Partially coated protective gown with tie belt and elastic cuffs, EN 13034, EN 14126, EN 13688, EN 14325, PPE Cat. III and MD Class I, certified infection and chemical protection, material tested against cytostatic drugs.

Certified protection against chemicals and infectious agents in one – the DACH IsoCoat Chem series offers Type PB [6]-B protective gowns with reinforced sleeves and front, providing tested barrier performance for use wherever liquid chemicals and biological hazards converge.

The IsoCoat Chem protective gowns are made of a composite material of polypropylene non-woven fabric and polyethylene film on the front and sleeves, as well as polypropylene non-woven fabric on the back. This results in a gown with high chemical resistance yet equally high wearing comfort. Standards-compliant testing of chemical resistance achieved the highest protection class in all tests. Protection against infectious agents was tested according to EN 14126, also reaching high performance levels. Material testing against 7 different cytostatic drugs demonstrates that the gown provides reliable protection even with the most hazardous type of medication. As a single-use product, the gown contributes to the prevention of cross-contamination. The striking high-visibility yellow colour enables quick identification in daily work routines and reduces the risk of mix-ups. Elastic polyurethane cuffs pose no irritation potential for individuals with latex allergies and provide a secure seal at the wrist. 

Examples of use:
• Care of patients with infectious diseases
• Preparation or handling of cytostatic drugs
• Handling of infectious samples, bacterial cultures, or contaminated liquids
• Splash protection against acids, alkalis, or organic solvents


→
[4S01/BL/XL] Surgical gown EcoCoat S, sterile (XL) Bestseller

Surgical gown EcoCoat S, sterile

REF 4S01
Sterile surgical gowns for surgical procedures and other sterile applications in medical settings. The liquid-repellent material provides reliable protection while ensuring a high level of comfort.

The EcoCoat S REF 4S01/BL was developed for use in the operating room and combines sterility, high comfort, and reliable protection in sensitive medical environments. The liquid-repellent fabric construction and the tested barrier effect against liquids and bacteria support safe workflows during surgical procedures.

The sterile standard surgical gown is classified as a Class I medical device and is manufactured in accordance with EN ISO 13485:2016. The material consists of a liquid-repellent PP nonwoven fabric with a microfiber middle layer and provides protection against the penetration of liquids and bacteria. The low-lint and abrasion-resistant gown is ultrasonically welded and partially contains 35 g/m² SMS nonwoven fabric with microfibers. The medical-grade folding allows for user-friendly removal and facilitates sterile donning. The opening at the back, two tie straps at the collar, two tie belts, and knitted cuffs ensure a secure and comfortable fit. The gown is free of natural latex and intended for single use. Sterilization is performed using ethylene oxide. The tested bacterial penetration according to EN ISO 22610 achieved values of 4.38 for the material and 4.16 for the seam. The microbiological purity, at < 27 CFU/100 cm², was well below the limit of ≤ 300 CFU/100 cm². In addition, a liquid penetration of > 20 cm H₂O and high values for burst and tear resistance were demonstrated.

Examples of use
  • Performing surgical procedures by surgeons and surgical assistants
  • Sterile procedures in the operating room
  • Preparation for and support during surgical procedures
  • Working in Sterile Treatment and Intervention Rooms

→
[422Y/M] Protective gown SplashCoat pro+ (M) Bestseller

Protective gown SplashCoat pro+

REF 422Y
Protective gowns with liquid-repellent and infection-control-certified front and sleeve panels for applications involving an increased risk of exposure. The breathable back panel ensures high comfort even during extended periods of wear.

The SplashCoat pro+ REF 422Y was designed for applications that require enhanced protection in the front area combined with high comfort. The sleeves and front panels, which have been tested for liquid and infection protection, provide reliable protection, while the breathable back panel ensures comfort even during extended wear.

The front panel and sleeves of the gown are made of Splash+ fabric, which has been tested in accordance with EN 14126 for protection against the penetration of bacteria and viruses. The back panel, made of thin polypropylene nonwoven fabric, ensures improved breathability and helps maintain a comfortable body temperature while working. The opening at the back makes it easy to put on and take off. Two drawstrings at the collar and two waist ties ensure a secure and customizable fit. Knitted polyester cuffs provide a reliable seal at the wrist and improve coverage when worn with protective gloves. In material testing, the Splash+ material achieved performance level 6 for resistance to the penetration of contaminated liquids under hydrostatic pressure, as well as performance level 6 for resistance to the penetration of infectious agents due to mechanical contact. In addition, performance levels 3 were achieved against contaminated liquid aerosols and 3 against contaminated solid particles. Furthermore, no adverse reactions were observed during dermatological compatibility testing.

Examples of use
  • Patient care involving increased contact with fluids
  • Providing emergency medical care to patients with infectious diseases
  • Care and treatment measures in hospitals and long-term care facilities
  • Precautionary measures in cases of suspected communicable infectious diseases

→
[561/S] Protective Coverall BioSafe®, Type 4B, 5B, 6B (S) Bestseller

Protective Coverall BioSafe®, Type 4B, 5B, 6B

REF 561
Protects against chemical splashes and infectious agents. Sealed seams and a self-adhesive chin strap provide reliable protection. Knitted cuffs with thumb loops ensure a secure fit.

The BioSafe REF 561 was designed for demanding applications that require reliable protection against biological hazards, liquid chemicals, and contaminated particles. Its spray-resistant construction with taped seams provides a high level of protection and ensures safe working conditions even under challenging conditions.

The protective suit is certified as Category III PPE and meets the requirements for protection classes 4-B, 5-B, and 6-B in accordance with EN 14605, EN ISO 13982-1, EN 13034, and EN 14126. The multi-layer material combines a soft, skin-friendly non-woven fabric on the inside with a microporous PE film on the outside, which is breathable yet liquid-repellent. All seams are taped to prevent liquids from penetrating through the seams. The ergonomic cut ensures a high degree of freedom of movement, while the elastic waistband supports an optimal fit. Elastic knit cuffs with integrated thumb loops ensure a secure transition to protective gloves and minimize exposed areas. The comfortable hood is designed to fit securely even when worn with respiratory masks. The self-adhesive zipper cover with extended chin guard provides increased protection in the particularly vulnerable neck area. The high level of protection is demonstrated by a resistance to penetration by contaminated liquids containing bacteriophages of 20 kPa (EN Class 6) and a resistance to mechanically transmitted pathogens of over 75 minutes (EN Class 6). Repellency indices of over 95% and penetration indices of less than 1% were achieved against sulfuric acid (30%), sodium hydroxide (10%), and butanol. In addition, the suit meets the requirements of EN 1149-5 for electrostatic properties and EN 1073-2 for radioactive contamination from solid particles, and is recommended for ISO Class 6 to 9 cleanrooms based on the Helmke Drum Test Category II.

Examples of use
  • Handling of biological hazards and infectious materials
  • Working in Isolation and Quarantine Areas
  • Activities involving chemical splashes and spray mist
  • Working in cleanrooms in the pharmaceutical and biotechnology industries

→
[865/B/S] Disposable glove GentleSafe® EXTRA, 300 mm, Box of 100 (S, Blue) Bestseller

Disposable glove GentleSafe® EXTRA, 300 mm, Box of 100

REF 865
Disposable nitrile gloves with extra-long cuffs for enhanced protection when working with chemicals, cytostatic drugs, and biological hazards. The lightweight material provides excellent tactile sensitivity while offering a high level of protection.

The GentleSafe® EXTRA REF 865 was designed for users who need exceptionally lightweight yet reliable protection against chemicals, cytostatic drugs, and biological hazards. The extra-long design provides additional protection for the wrist and forearm, combining high comfort with excellent dexterity.

These powder-free and latex-free disposable gloves are made of carboxylated nitrile-butadiene rubber and are classified as both Category III PPE and a Class I medical device. The extra-long version, measuring 308 mm in length, offers additional protection against chemicals and liquids. Despite its lightweight material, the glove provides maximum dexterity (Level 5 according to EN ISO 21420) and excellent tactile sensitivity. The textured fingertips ensure a secure grip, even when handling damp or wet objects. The glove meets the requirements of EN ISO 374-1 Type B and provides protection against chemicals, viruses, bacteria, and fungi in accordance with EN ISO 374-5. It achieves protection level 6 against 40% sodium hydroxide, protection level 2 against 30% hydrogen peroxide, and protection level 3 against 37% formaldehyde. Resistance to numerous cytostatic agents was tested according to ASTM D6978-05; breakthrough times of over 240 minutes were demonstrated for active ingredients such as cisplatin, cyclophosphamide, dacarbazine, doxorubicin HCl, etoposide, fluorouracil, methotrexate, mitomycin C, paclitaxel, and vincristine. With a finger thickness of 0.10 mm, the glove combines a sensitive sense of touch with reliable protection. Additionally, it is suitable for food contact in accordance with Regulation (EC) No. 1935/2004 and is free of natural latex, carbamates, thiurams, and thiazoles. It is available in blue, white, and black, as well as in sizes XS through XXL.

Examples of use
  • Preparation and Administration of Anticancer Drugs
  • Handling Chemicals, Acids, and Bases
  • Laboratory analyses and sample handling
  • Cleaning and Disinfection
  • Food Processing and Quality Control

→
[863/B/S] Disposable glove GentleSafe® Nitrile, 240 mm, box of 100 (S, Blue) Bestseller

Disposable glove GentleSafe® Nitrile, 240 mm, box of 100

REF 863
Disposable nitrile gloves offering superior comfort and excellent tactile sensitivity for precise work in medical, laboratory, and industrial settings. The textured fingertips provide a secure grip while ensuring reliable protection against chemicals and biological hazards.

The GentleSafe® Nitrile REF 863 combines superior comfort, excellent tactile sensitivity, and reliable protection for everyday use in medical, laboratory, and industrial settings. The material’s high elasticity and lightweight design allow for fatigue-free work, even during extended wear.

These powder-free and latex-free disposable gloves are made of carboxylated nitrile-butadiene rubber and are classified as both Category III PPE and a Class I medical device. The textured surface on the fingertips ensures a secure grip, even when handling wet or damp objects. Thanks to its high elasticity, the glove offers maximum dexterity (Level 5 according to EN ISO 21420) and supports precise work with excellent tactile sensitivity. The glove is liquid-impermeable and provides protection against chemicals, viruses, bacteria, and fungi in accordance with EN ISO 374-5. It achieves protection level 6 against 40% sodium hydroxide, protection level 2 against 30% hydrogen peroxide, and protection level 3 against 37% formaldehyde. Resistance to numerous cytostatic agents was tested according to ASTM D6978-05; for active ingredients such as cisplatin, cyclophosphamide, dacarbazine, doxorubicin HCl, etoposide, fluorouracil, methotrexate, mitomycin C, paclitaxel, and vincristine sulfate, no breakthrough was detected within 240 minutes. With a finger thickness of just 0.10 mm, a length of 246 mm, and a tensile strength of at least 14 MPa before and after aging, the glove combines high protection with excellent comfort. In addition, it is suitable for food contact in accordance with Regulation (EC) No. 1935/2004 and is free of natural latex, carbamates, thiurams, and thiazoles. The glove is available in blue, white, and black, as well as in sizes XS through XXL.

Examples of use
  • Diagnostic and nursing activities in the healthcare sector
  • Laboratory analyses and sample handling
  • Handling Chemicals and Disinfectants
  • Food Processing and Quality Control
  • Cleaning and decontamination work

→
[9079/M] Infection protection kit (M) Bestseller

Infection protection kit

REF 9079
Protective kit including 1 x Type 3B coverall, 1 x FFP3 NR D respirator with valves, 3 pairs of gloves, 1 x goggles, 1 pair of boot covers, 1 x adhesive tape, 1 x disposal bag with cable ties.

Complete protection for emergencies: the DACH Infection Control Kit combines all the necessary components for safely managing highly infectious situations in a well-designed, comprehensive package that provides reliable protection for medical staff and emergency services personnel from head to toe.

The infection control kit combines seven coordinated protective components to form a complete set of equipment for use in highly infectious environments. At the heart of the kit is the Type 3B/4B/5B/6B chemical protection suit, which, when used in combination with the FFP3 respirator, full-view safety goggles, disposable gloves and boot covers, ensures seamless, all-round protection from head to toe. This robust duct tape allows for the secure sealing of joints between individual protective components, such as at sleeve and leg cuffs, thereby preventing any unprotected areas throughout the entire operation. After use, the biohazard disposal bag is sealed with cable ties to ensure the safe and compliant disposal of contaminated materials. 

Examples of use:
• Care for highly infectious patients in hospitals and isolation wards
• Ambulance services and emergency response operations involving unknown or highly infectious hazardous substances
• Biological hazard response and decontamination operations
• Care homes in the event of an outbreak or highly contagious diseases

Can’t find the right set for you? No problem! We’d be happy to put together bespoke sets for you, perfectly tailored to your needs. 
→
[257VPS/W] Respirator Neolution®Air Loop, FFP3, sterile

Respirator Neolution®Air Loop, FFP3, sterile

REF 257VPS/W
Sterilized FFP2 mask, made in Germany. Our innovative filter material for the Neolution®Air Loop respirator ensures low breathing resistance. The covered exhalation valve prevents heat and moisture buildup. Convenient ear loops make it easy to wear.

The flagship product of the Neolution®Air Loop family: the sterilized Neolution®Air Loop with a covered valve combines maximum FFP3 protection, a filtered exhalation valve, and validated ethylene oxide sterilization in a single-use, individually packaged mask, thereby setting the highest possible standard for aseptic processes, cleanrooms, and surgical applications where the focus is on the wearer, the environment, and the product.

The sterilized Neolution®Air Loop with a covered valve is made of high-quality polypropylene nonwoven fabric and features natural latex-free ear loops, a flexible nose clip, a polypropylene exhalation valve, and a filtering meltblown valve cover – sterilized according to ISO 11135 using a validated ethylene oxide process with a proven microbial reduction of at least 6 log. The high-tech FFP3-class filter material achieves an actual particle penetration rate that is many times lower than the legal requirement of max. 1% and a bacterial filtration efficiency greater than 98%. The filtered exhalation valve noticeably reduces heat and moisture buildup, while the filtering valve cover simultaneously traps germs and droplets from exhaled air—a protective concept that safeguards both the wearer and the surrounding environment. Each mask is delivered individually packaged to maintain sterility without compromise until the moment of use. The three-part design follows the natural movements of the jaw and ensures a consistently tight fit without the need for readjustment; the wide ear loops do not dig in, even after long shifts. Scientifically proven skin compatibility according to EN ISO 10993 and a passed dolomite dust retention test complete the unique performance profile of this mask.

Examples of use:
  • • Manufacture of pharmaceuticals
  • • Medical procedures involving patients with infectious diseases
  • • Manufacture of cytostatic drugs
  • • Working in biological laboratories
  • • Manufacture of medical devices

→
[256VPS/W] Respirator Neolution®Air, FFP3, sterile

Respirator Neolution®Air, FFP3, sterile

REF 256VPS/W
Sterilised FFP3 mask, made in Germany. Our innovative filter material for the Neolution®Air respirator ensures low breathing resistance. The covered exhalation valve prevents heat and moisture build-up. The comfortable headband provides a secure fit without causing ear pain.

The flagship product of the Neolution®Air range – the sterilised Neolution®Air with a covered valve – combines maximum FFP3 protection, a filtered exhalation valve and validated ethylene oxide sterilisation in a single-packed, disposable mask, thereby setting the highest possible standard for aseptic processes, cleanrooms and surgical applications where the focus is on the wearer, the environment and the product.

The sterilised Neolution®Air with a covered valve is made from high-quality polypropylene non-woven fabric, featuring a textile headband free from natural latex, a flexible nose clip, an exhalation valve and a filtering meltblown valve cover. It is sterilised in accordance with ISO 11135 using a validated ethylene oxide process with a proven germ reduction of at least 6 log. The high-tech FFP3-class filter material achieves an actual particle penetration rate that is many times lower than the legal requirement of max. 1% and a bacterial filtration efficiency of over 98%. The filtered exhalation valve noticeably reduces heat and moisture build-up, whilst the filtering valve cover simultaneously retains germs and droplets from the exhaled air – a protection concept that safeguards both the wearer and the environment. Each mask is supplied individually packaged to maintain sterility without compromise until the moment of use. The three-part design follows the natural movements of the jaw and ensures a constant, secure fit without the need for readjustment. The fabric headband does not put pressure on the ears and offers a secure hold even during prolonged wear, making it ideal for spectacle wearers. Scientifically proven skin compatibility in accordance with EN ISO 10993 and a passed dolomite dust retention test complete the unique performance profile of this mask.

Examples of use:
  • • Manufacture of pharmaceuticals
  • • Medical procedures involving patients with infectious diseases
  • • Manufacture of cytostatic drugs
  • • Working in biological laboratories
  • • Manufacture of medical devices

→
[255VPS/W] Respirator Neolution®Air, FFP2, sterile

Respirator Neolution®Air, FFP2, sterile

REF 255VPS/W
Sterilized FFP2 mask, Made in Germany. Our innovative filter material for the Neolution®Air respirator ensures low breathing resistance. The covered exhalation valve prevents heat and moisture buildup. The comfortable headband provides a secure fit without causing ear pain.

The ultimate protective solution for the highest cleanroom and hygiene standards: the Neolution®Air sterile respirator with a covered valve combines validated ethylene oxide sterilization, a filtered exhalation valve, and FFP2 filter performance in a single disposable mask, thereby providing the highest level of protection for the wearer, the environment, and the product.

The sterile respirator mask is made of high-quality polypropylene nonwoven fabric with a natural latex-free textile headband, a flexible nose clip, an exhalation valve, and a meltblown filter cover. The mask is sterilized in accordance with ISO 11135 using a validated ethylene oxide process with a proven bacterial reduction of at least 6 log. The high-tech filter material achieves maximum filtration efficiency with a breathing resistance well below the permissible limits, while the filtered exhalation valve simultaneously noticeably reduces moisture and heat buildup. The filtering valve cover traps germs and droplets from the wearer’s breath—a decisive advantage over open-valve masks, making this variant suitable for aseptic processes and the operating room. Each mask is delivered individually packaged to maintain sterility without compromise until use. The three-part design follows jaw movements during speech and ensures a consistently tight seal. The fabric headband does not put pressure on the ears and provides a secure fit even during prolonged wear, making it ideal for eyeglass wearers. Scientifically proven skin compatibility according to EN ISO 10993 and a passed dolomite dust retention test round out the performance profile of this unique combination.

Examples of use:
  • • Aseptic processes and sterile production (GMP C, D)
  • • sterile laboratory areas
  • • Manufacturing or packaging of sterile medical devices

→
[253VPS/W] Respirator Neolution®Air Loop, FFP2, sterile

Respirator Neolution®Air Loop, FFP2, sterile

REF 253VPS/W
Sterilized FFP2 mask, made in Germany. Our innovative filter material for the Neolution®Air Loop respirator ensures low breathing resistance. The covered exhalation valve prevents heat and moisture buildup. Convenient ear loops make it easy to wear.

The ultimate protective solution for the highest cleanroom and hygiene standards: the Neolution®Air Loop sterile respirator mask with a covered valve combines validated ethylene oxide sterilization, a filtered exhalation valve, and FFP2 filter performance in a single disposable mask, thereby providing the highest level of protection for the wearer, the environment, and the product.

The sterile respirator mask is made of high-quality polypropylene nonwoven fabric with natural latex-free ear loops, a flexible nose clip, a polypropylene exhalation valve, and a meltblown filter cover. The mask is sterilized in accordance with ISO 11135 using a validated ethylene oxide process with a proven bacterial reduction of at least 6 log. The high-tech filter material achieves maximum filtration efficiency with a breathing resistance well below the permissible limits, while the filtered exhalation valve simultaneously noticeably reduces moisture and heat buildup. The filtering valve cover retains germs and droplets from the wearer’s breath—a decisive advantage over open-valve masks, making this variant suitable for aseptic processes and the operating room. Each mask is delivered individually packaged to maintain sterility without compromise until use. The three-part design follows jaw movements during speech and ensures a consistently tight seal; the wide ear loops do not dig in even after hours of wear. Scientifically proven skin compatibility according to EN ISO 10993 and a passed dolomite dust retention test round out the performance profile of this unique combination.

Examples of use:
  • • Aseptic processes and sterile production (GMP C, D)
  • • sterile laboratory areas
  • • Manufacturing or packaging of sterile medical devices

→
[255S/W] Respirator Neolution®Air, FFP2, sterile

Respirator Neolution®Air, FFP2, sterile

REF 255S/W
Sterilised FFP2 mask, made in Germany. Our innovative filter material for the Neolution®Air respirator ensures low breathing resistance and particle filtration performance tested in accordance with IEST-RP-CC003.5. The comfortable headband provides a secure fit without causing ear pain.

In a class of its own: the Neolution®Air sterilised FFP2 respirator combines the proven high-performance filtration of the Neolution®Air series with validated ethylene oxide sterilisation, making it the first choice for cleanrooms and aseptic processes where sterility is not an option b

The sterilised Neolution®Air is made from the same high-quality polypropylene non-woven fabric with a textile headband free from natural latex and a flexible nose clip as the tried-and-tested standard version – supplemented by validated sterilisation in accordance with ISO 11135 using ethylene oxide, which has been proven to ensure a bacterial reduction of at least 6 log. The high-tech filter material achieves maximum filtration efficiency with a breathing resistance well below the permissible limits – for free, effortless breathing even during prolonged wear. The three-part design follows the natural movements of the jaw and ensures a constant, secure fit without the need for readjustment. The fabric headband does not put pressure on the ears and offers a secure hold even during prolonged wear, making it ideal for spectacle wearers. Each mask is supplied individually packaged to maintain sterility until the moment of use. Scientifically proven skin compatibility in accordance with EN ISO 10993 and a passed dolomite dust retention test round off the performance profile of this exceptional disposable mask.

Examples of use:
  • • Aseptic processes and sterile production (GMP C, D)
  • • sterile laboratory areas
  • • Manufacturing or packaging of sterile medical devices

→
[253S/W] Respirator Neolution®Air Loop, FFP2, sterile

Respirator Neolution®Air Loop, FFP2, sterile

REF 253S/W
Sterilized FFP2 respirator, Made in Germany. Our innovative filter material for the Made-in-Germany Neolution®Air Loop respirator ensures low breathing resistance and tested particle shedding in accordance with IEST-RP-CC003.5. Convenient ear loops make it easy to use.

In a class of its own: the Neolution®Air Loop sterilized FFP2 respirator combines the proven high-performance filtration of the Neolution®Air series with validated ethylene oxide sterilization, making it the top choice for cleanrooms and aseptic processes where sterility is not an option but a requirement.

The sterilized Neolution®Air Loop is made of the same high-quality polypropylene nonwoven fabric with latex-free polyester-elastane ear loops and a flexible nose clip as the proven standard version—supplemented by validated sterilization in accordance with ISO 11135 using ethylene oxide, which has been proven to ensure a bacterial reduction of at least 6 log. The high-tech filter material achieves maximum filtration efficiency with a breathing resistance well below the permissible limits—for easy, fatigue-free breathing even during prolonged wear. The three-part design follows the natural movements of the jaw and ensures a consistently tight seal without the need for readjustment; the wide ear loops do not dig in, even after hours of wear. Each mask is delivered individually packaged to maintain sterility until the moment of use. Scientifically proven skin compatibility according to EN ISO 10993 and a passed dolomite dust retention test round out the performance profile of this exceptional disposable mask.

Examples of use:
  • • Aseptic processes and sterile production (GMP C, D)
  • • sterile laboratory areas
  • • Manufacturing or packaging of sterile medical devices

→
[257S/W] Respirator Neolution®Air Loop, FFP3, sterile

Respirator Neolution®Air Loop, FFP3, sterile

REF 257S/W
Sterilised FFP3 mask, Made in Germany. Our innovative filter material for the Neolution®Air Loop respirator ensures low breathing resistance and particle filtration performance tested in accordance with IEST-RP-CC003.5. Practical ear loops make it easy to use.

FFP3 maximum protection, supplied sterile and with no compromise on environmental protection – the DACH Neolution®Air Loop 257S/W combines validated ethylene oxide sterilisation with FFP3 filter performance, thereby providing the highest possible level of protection for the wearer, the environment and the product in aseptic processes and high-risk areas.

The Neolution®Air Loop 257S/W is made from high-quality polypropylene non-woven fabric with ear loops free from natural latex and a flexible nose clip – sterilised in accordance with ISO 11135 using a validated ethylene oxide process with a proven bacterial reduction of at least 6 log. The high-tech FFP3-class filter material achieves an actual particle penetration rate that is many times lower than the legal requirement of max. 1% and a bacterial filtration efficiency of over 98%. It therefore protects against the most dangerous aerosols as well as bacteria and pathogens. All exhaled air is completely expelled through the filter material, making this variant the first choice wherever both environmental protection and wearer protection are required at the highest level. Each mask is supplied individually packaged to maintain sterility without compromise until use. The three-part design follows the natural movements of the jaw and ensures a constant, secure fit without the need for readjustment; the wide ear loops do not cut into the skin, even after prolonged wear. Scientifically proven skin compatibility in accordance with EN ISO 10993 and a passed dolomite dust retention test complete the performance profile of this exceptional disposable mask.

Examples of use:
  • • Manufacture of pharmaceuticals
  • • Medical procedures involving patients with infectious diseases
  • • Manufacture of cytostatic drugs
  • • Working in biological laboratories
  • • Manufacture of medical devices

→
[256S/W] Respirator Neolution®Air, FFP3, sterile

Respirator Neolution®Air, FFP3, sterile

REF 256S/W
Sterilised FFP3 mask, made in Germany. Our innovative filter material for the Neolution®Air respirator ensures low breathing resistance and particle filtration performance tested in accordance with IEST-RP-CC003.5. The comfortable headband provides a secure fit without causing ear pain.

FFP3 maximum protection, supplied sterile and with no compromise on environmental protection – the Neolution®Air combines validated ethylene oxide sterilisation with FFP3 filter performance, thereby providing the highest possible level of protection for the wearer, the environment and the product in aseptic processes and high-risk areas.

The Neolution®Air is made from high-quality polypropylene non-woven fabric, featuring a textile headband free from natural latex and a flexible nose clip. It is sterilised in accordance with ISO 11135 using a validated ethylene oxide process, with a proven bacterial reduction of at least 6 log. The high-tech FFP3-class filter material achieves an actual particle penetration rate that is many times lower than the legal requirement of max. 1% and a bacterial filtration efficiency of over 98%. It therefore protects against the most dangerous aerosols as well as bacteria and pathogens. All exhaled air is completely expelled through the filter material, making this variant the first choice wherever both environmental protection and wearer protection are required at the highest level. Each mask is supplied individually packaged to maintain sterility without compromise until use. The three-part design follows the natural movements of the jaw and ensures a constant, tight fit without the need for readjustment. The fabric headband does not put pressure on the ears and offers a secure fit even during prolonged wear, making it ideal for spectacle wearers. Scientifically proven skin compatibility in accordance with EN ISO 10993 and a passed dolomite dust retention test complete the performance profile of this exceptional disposable mask.

Examples of use:
  • • Manufacture of pharmaceuticals
  • • Medical procedures involving patients with infectious diseases
  • • Manufacture of cytostatic drugs
  • • Working in biological laboratories
  • • Manufacture of medical devices

→
[242FCV-1] Respirator Comfort, FFP2

Respirator Comfort, FFP2

REF 242FCV-1
FFP2 respirator mask with high filtration efficiency for protection against aerosols and airborne particles. Activated carbon to neutralise odours and an exhalation valve for easy breathing and increased comfort.

Comfort, hygiene, reliability, practicality and design are the key features of the “Comfort” range of respiratory masks. Compact and comfortable, the mask is ideal for a wide variety of applications.

The “Comfort” range of respirator masks offers reliable protection against dust, aerosols and non-volatile liquid particles. The respirator is classified as Category III PPE and meets the requirements of protection class FFP2 NR in accordance with EN 149:2001+A1:2009. The mask is made of polypropylene non-woven fabric on both the outside and inside and uses a filter medium made of polypropylene microfibres. A layer of activated carbon filters out unpleasant odours, such as those found in waste management, livestock farms or The additional exhalation valve prevents heat build-up and moisture inside the mask, thereby significantly increasing wearing comfort. The horizontal fold allows for easy transport and space-saving storage. Equipped with a high-performance filter, the ‘Komfort’ series respirators ensure high filtration performance with low breathing resistance, thereby providing maximum safety and comfort. The two-part, foldable design ensures easy handling and also allows for space-saving storage and practical transport. The nose clip is internal, does not press against the nose thanks to a padded insert, and can be easily adjusted to the individual shape of the nose. The large breathing volume and the continuous headband make the mask very comfortable, even when worn for long periods. The mask protects against airborne pathogens, aerosols and non-volatile liquid particles up to 10 times the respective exposure limit.

Examples of use:
  • • Handling powdered chemicals
  • • Livestock farming and veterinary science
  • • Biological or chemical laboratories
  • • Construction and renovation work

→
[242FC-1] Respirator Comfort, FFP2

Respirator Comfort, FFP2

REF 242FC-1
FFP2 respirator mask with high filtration efficiency for protection against aerosols and airborne particles. Foldable design with a large breathing volume and activated carbon to reduce unpleasant odours.

Comfort, hygiene, reliability, practicality and design are the key features of the “Comfort” range of respiratory masks. Compact and comfortable, the mask is ideal for a wide variety of applications.

The “Comfort” range of respirators offers reliable protection against dust, aerosols and non-volatile liquid particles. The respirator is classified as Category III PPE and meets the requirements of protection class FFP2 NR in accordance with EN 149:2001+A1:2009. The mask is made of polypropylene non-woven fabric on both the outside and inside and uses a filter medium made of polypropylene microfibres. A layer of activated carbon filters out unpleasant organic odours, such as those found in waste management or livestock farms. The horizontal folding design makes it easy to carry and allows for space-saving storage. Equipped with a high-performance filter, the “Komfort” series of respiratory masks ensure high filtration performance with low breathing resistance, thereby offering maximum safety and comfort. The two-part, foldable design ensures easy handling and also allows for space-saving storage and convenient portability. The nose clip is internal, does not press against the nose thanks to a padded insert, and can be easily adjusted to the individual shape of the nose. The large breathing volume and the continuous headband make the mask very comfortable, even when worn for long periods. The mask protects against airborne pathogens, aerosols and non-volatile liquid particles up to 10 times the respective exposure limit.

Examples of use:
  • • Handling powdered chemicals
  • • Livestock farming and veterinary science
  • • Biological or chemical laboratories
  • • Construction and renovation work

→
[247C] Respirator ecoComfort, FFP2

Respirator ecoComfort, FFP2

REF 247C
FFP2 respirator mask with high filtration efficiency for protection against aerosols and airborne particles. The wide head straps ensure comfortable wear during everyday work. Features activated carbon to combat odours.

The ‘ecoComfort’ series of respirators offers reliable respiratory protection in a particularly compact and user-friendly design. The vertically foldable design allows for space-saving storage, whilst the wide head straps and adjustable nose clip ensure a comfortable fit during everyday work. A key feature is the additional activated carbon layer, which filters unpleasant odours out of the air.

The particle-filtering half mask is classified as Category III PPE and meets the requirements of protection class FFP2 NR in accordance with EN 149:2001+A1:2009. The mask is made of polypropylene non-woven fabric on both the outside and inside and uses a filter medium made of polypropylene microfibres. A layer of activated carbon filters out unpleasant organic odours, such as those encountered in waste management or livestock farming. The vertical pleating allows for easy carrying and space-saving storage. Wide headbands made of polyester and elastane distribute pressure evenly across the head without straining the ears, ensuring comfortable wear. The plastic-coated nose clip can be individually adjusted to the shape of the face and, together with the internal nose pad, improves the seal around the nose. All materials used are free from natural latex. The mask protects against airborne pathogens, aerosols and non-volatile liquid particles up to 10 times the respective exposure limit.

Examples of use:
  • • Protection against airborne pathogens in the healthcare sector
  • • Working in environments with aerosol exposure
  • • Work in care and support facilities
  • • Livestock farming and veterinary science
  • • General protective measures in industry and the skilled trades
  • • Renovation work

→