Emergency Medical Services and Emergency Care

Astronaut-style cap designed to fully cover the head, hair, and neck in hygiene-critical work environments. The antistatic-treated non-woven fabric meets high hygiene standards and ensures comfortable wear.

The MediCap AstroEco REF 121G was designed for hygiene-critical work areas where comprehensive coverage of the head, hair, and neck is required. Its astronaut-style design provides extensive coverage and helps ensure compliance with strict hygiene requirements in sensitive work environments.

The hood is classified as a Class I medical device and is made of antistatic-treated polypropylene nonwoven fabric. The astronaut-style design consists of a head section and a wraparound section, ensuring that the head and neck are reliably covered. Both components are joined together with an overlock seam, ensuring a sturdy construction. The wraparound section can also be used to tie the hood, allowing for a custom fit. The non-woven fabric used is antistatic and suitable for use in controlled environments. Latex-free elastic components contribute to a comfortable fit and minimize the risk of latex allergies. The green design facilitates visual identification within various hygiene areas. When stored properly, the cap has a shelf life of up to 10 years.

Examples of use

Medical Type IIR mask with an integrated anti-fog strip for clear vision and high protection. The liquid-resistant design and high level of comfort make it ideal for use in demanding medical settings.

The MediComfort Antifog REF 223-1 was specifically designed for users who want to combine clear vision and high comfort with reliable medical protection. The integrated anti-fog strip reduces fogging on the lenses and helps users stay focused during their daily medical work.

The medical face mask is classified as a Class I medical device and, as a Type IIR mask, meets the requirements of the EN 14683:2019+AC:2019 standard. The anatomically shaped design, featuring a slightly adjustable nose clip, allows for individual adjustment to the shape of the face and ensures a secure fit. The inner and outer layers consist of skin-friendly, physiologically safe, and plasticizer-free polypropylene nonwoven fabric. The filter system is based on a meltblown nonwoven fabric made of polypropylene microfibers and achieves a bacterial filtration efficiency (BFE) of 99.9%. A foam anti-fog strip in the nose area reduces the escape of moist exhaled air, thereby preventing fogging of eyeglass lenses. The mask is ultrasonically welded and free of natural latex. With a pressure difference of only 35.4 Pa/cm², it offers high breathing comfort even during prolonged wear. The splash resistance of 16 kPa meets the requirements for Type IIR liquid-resistant masks. The microbiological purity of ≤ 3.99 CFU/g is well below the required limit of ≤ 30 CFU/g. The dermatological test revealed no contraindications.

Examples of use

Medical Type IIR mask with high filtration efficiency and a liquid-resistant protective barrier for everyday use. The colored design allows for easy visual differentiation between teams, departments, or roles.

The MediClassic Color combines reliable medical protection with a colorful design for easy visual differentiation. This Type IIR mask offers high filtration performance and comfortable breathing, making it suitable for daily use in medical facilities.

The medical face mask is classified as a Class I medical device and meets the requirements of EN 14683:2019 as a Type IIR mask. The anatomically shaped design, featuring an easily adjustable nose clip, allows for a custom fit to the shape of the face and ensures a secure seal. The mask is ultrasonically welded and features elastic ear loops made of soft polyester and spandex. The inner and outer layers are made of skin-friendly, hypoallergenic, and phthalate-free polypropylene, ensuring high comfort. The filter system achieves a bacterial filtration efficiency (BFE) of 99.9%, significantly exceeding the requirements of the Type IIR classification. With a pressure difference of only 33.3 Pa/cm², the mask allows for comfortable breathing even during prolonged wear. The splash resistance of 16 kPa meets the requirements for liquid-resistant medical face masks. At ≤ 5 CFU/g, the microbiological purity is well below the required limit of ≤ 30 CFU/g. All materials used are free of irritants, odorless, and suitable for medical applications.

Examples of use

Fog-free face shield with soft forehead padding. Protects the wearer from liquid splashes, in accordance with EN 166. Meets PPE Category II requirements.

The OptiProtect face shield was designed for work environments where reliable facial and splash protection must be combined with a high level of comfort. Its distortion-free vision and lightweight design make it comfortable to wear even for extended periods.

The face shield is classified as Category II PPE and consists of an anti-fog-treated PET shield, an ergonomically shaped PU foam head pad, and a latex-free elastic strap. The unidirectional PET used minimizes extrusion lines and provides glass-like transparency with distortion-free vision. This reduces dizziness during prolonged use and promotes a clear view of the work environment. The rounded corners allow for unrestricted head movement and enhance comfort during daily work. Unlike traditional ear loops, the elastic headband runs behind the head, thereby preventing pressure points around the ears. The lightweight, breathable, and skin-friendly head padding ensures an optimal anatomical fit even during extended wear. All materials used are free of irritants, odorless, and latex-free. The anti-fog coating further contributes to consistently clear vision and supports use in sensitive work environments.

Examples for use

Partially coated protective gown with tie belt and elastic cuffs, EN 13034, EN 14126, EN 13688, EN 14325, PPE Cat. III and MD Class I, certified infection and chemical protection, material tested against cytostatic drugs.

Certified protection against chemicals and infectious agents in one – the DACH IsoCoat Chem series offers Type PB [6]-B protective gowns with reinforced sleeves and front, providing tested barrier performance for use wherever liquid chemicals and biological hazards converge.

The IsoCoat Chem protective gowns are made of a composite material of polypropylene non-woven fabric and polyethylene film on the front and sleeves, as well as polypropylene non-woven fabric on the back. This results in a gown with high chemical resistance yet equally high wearing comfort. Standards-compliant testing of chemical resistance achieved the highest protection class in all tests. Protection against infectious agents was tested according to EN 14126, also reaching high performance levels. Material testing against 7 different cytostatic drugs demonstrates that the gown provides reliable protection even with the most hazardous type of medication. As a single-use product, the gown contributes to the prevention of cross-contamination. The striking high-visibility yellow colour enables quick identification in daily work routines and reduces the risk of mix-ups. Elastic polyurethane cuffs pose no irritation potential for individuals with latex allergies and provide a secure seal at the wrist. 

Examples of use:

• Care of patients with infectious diseases

• Preparation or handling of cytostatic drugs

• Handling of infectious samples, bacterial cultures, or contaminated liquids

• Splash protection against acids, alkalis, or organic solvents

Sterile surgical gown for surgical procedures and other sterile applications in a medical setting. The liquid-repellent material provides reliable protection while ensuring a high level of comfort.

The EcoCoat S was developed for use in the operating room and combines sterility, high comfort, and reliable protection in sensitive medical environments. The liquid-repellent material construction and the tested barrier effect against liquids and bacteria support safe workflows during surgical procedures.

The sterile standard surgical gown is classified as a Class I medical device and is manufactured in accordance with EN ISO 13485:2016. The material consists of a liquid-repellent PP nonwoven fabric with a microfiber core layer and provides protection against the penetration of liquids and bacteria. The low-lint, abrasion-resistant gown is ultrasonically welded and made of SMS material. The medical-grade folding design allows for user-friendly removal and facilitates sterile donning. The opening at the back, Velcro closure at the collar, two tie belts, and knitted cuffs ensure a secure and comfortable fit. The gown is free of natural latex and intended for single use. Sterilization is performed using ethylene oxide. The gown meets the requirements for surgical gowns in the standard performance class according to the EN 13795 standard.

Examples of use

Protective gowns with liquid-repellent and infection-control-certified front and sleeve panels for applications involving an increased risk of exposure. The breathable back panel ensures high comfort even during extended periods of wear.

The SplashCoat pro+ REF 422Y was designed for applications that require enhanced protection in the front area combined with high comfort. The sleeves and front panels, which have been tested for liquid and infection protection, provide reliable protection, while the breathable back panel ensures comfort even during extended wear.

The front panel and sleeves of the gown are made of Splash+ fabric, which has been tested in accordance with EN 14126 for protection against the penetration of bacteria and viruses. The back panel, made of thin polypropylene nonwoven fabric, ensures improved breathability and helps maintain a comfortable body temperature while working. The opening at the back makes it easy to put on and take off. Two drawstrings at the collar and two waist ties ensure a secure and customizable fit. Knitted polyester cuffs provide a reliable seal at the wrist and improve coverage when worn with protective gloves. In material testing, the Splash+ material achieved performance level 6 for resistance to the penetration of contaminated liquids under hydrostatic pressure, as well as performance level 6 for resistance to the penetration of infectious agents due to mechanical contact. In addition, performance levels 3 were achieved against contaminated liquid aerosols and 3 against contaminated solid particles. Furthermore, no adverse reactions were observed during dermatological compatibility testing.

Examples of use

The disposable warm-up jacket, made from low-lint SMS trilaminate, provides effective protection against the cold in areas with strict hygiene requirements. Breathable, liquid-repellent, and treated with an antistatic finish, it features knitted cuffs and a collar for superior comfort.

The disposable warm-up jacket is a lightweight, heat-insulating disposable jacket designed for use wherever the highest hygiene standards apply and personal clothing is not permitted.

The disposable warm-up jacket is made of durable, low-lint SMS trilaminate (spunbond-meltblown-spunbond) with a soft cotton knit collar and polyester knit cuffs on the sleeves. The three-layer material combines liquid repellency and breathability in a lightweight, comfortable disposable product. Thanks to its antistatic finish in accordance with EN 1149-5, the jacket does not cling to the body, ensuring unrestricted freedom of movement during long shifts. Three practical pockets provide storage space for essentials right at the body. Medical staff working in cool rooms benefit from the warming function without compromising hygiene or safety standards. The product is free of natural latex and skin-friendly. The disposable warm-up jacket is also suitable for use in cleanrooms; based on the measurement of the particle retention efficiency according to IEST-RP-CC003.5 (Helmke Drum Test), its use is recommended in ISO Class 7 to 9 cleanrooms.

Examples of applications:

Overshoes made of antistatic-treated polypropylene nonwoven fabric with a liquid-repellent PE coating for controlled work areas. Heat-sealed seams and a robust construction reliably support cleanroom and hygiene protocols.

The REF 925W PP overshoes are designed for use in controlled and hygiene-critical areas where both particle control and protection against moisture are required. The combination of durable non-woven fabric, a liquid-repellent PE coating, and heat-sealed seams supports safe and clean work processes in sensitive environments.

The shoe covers are made of antistatic-treated polypropylene nonwoven fabric and feature a liquid-repellent polyethylene coating on the lower section. This protects footwear from dirt and moisture while helping to maintain high hygiene standards. All seams are securely welded using an ultrasonic process, resulting in a robust construction without sewn joints. The integrated elastic band made of natural rubber ensures a secure fit and makes it easy to put on and take off quickly. In the Helmke Drum Test according to IEST-RP-CC003.4, the shoe covers achieved Category II. For use in cleanrooms, suitability according to DIN EN ISO 14644-1 for ISO Classes 6 to 9 is recommended. The antistatic treatment supports use in controlled production environments. The contrasting blue sole allows for quick visual differentiation within hygiene protocols and work areas. With a length of 41 cm, the overshoes provide reliable coverage for various shoe models.

Examples of use

Protective kit including 1 x Type 3B coverall, 1 x FFP3 NR D respirator with valves, 3 pairs of gloves, 1 x goggles, 1 pair of boot covers, 1 x adhesive tape, 1 x disposal bag with cable ties.

Complete protection for emergencies: the DACH Infection Control Kit combines all the necessary components for safely managing highly infectious situations in a well-designed, comprehensive package that provides reliable protection for medical staff and emergency services personnel from head to toe.

The infection control kit combines seven coordinated protective components to form a complete set of equipment for use in highly infectious environments. At the heart of the kit is the Type 3B/4B/5B/6B chemical protection suit, which, when used in combination with the FFP3 respirator, full-view safety goggles, disposable gloves and boot covers, ensures seamless, all-round protection from head to toe. This robust duct tape allows for the secure sealing of joints between individual protective components, such as at sleeve and leg cuffs, thereby preventing any unprotected areas throughout the entire operation. After use, the biohazard disposal bag is sealed with cable ties to ensure the safe and compliant disposal of contaminated materials. 

Examples of use:

• Care for highly infectious patients in hospitals and isolation wards

• Ambulance services and emergency response operations involving unknown or highly infectious hazardous substances

• Biological hazard response and decontamination operations

• Care homes in the event of an outbreak or highly contagious diseases

Can’t find the right set for you? No problem! We’d be happy to put together bespoke sets for you, perfectly tailored to your needs. 

Protective kit including a partially coated protective gown, a disposable cap and an FFP3 mask without valve.

Quick and hassle-free protection for patient transport: the DACH Patient Transport Protection Kit combines a protective gown, respiratory protection and a hood in a compact set that is ready for use at all times and kept on hand at the points of use.

The Patient Transport Protection Set combines three coordinated protective components into a streamlined kit that is specifically tailored to the requirements of patient transport. At its heart is the partially coated protective gown, which, together with the FFP3 respirator, ensures reliable protection against splashes and aerosols during transport: Both components are designed for a high level of comfort, ensuring that staff remain fully operational even during prolonged operations or when under physical strain. The compact, easily portable design makes the set the ideal addition to emergency and transport vehicles, where quick access to reliable basic protection is crucial.

Examples of use:

• Patient transport and patient transfers

• Mobile emergency medical services

• Inter- and intra-hospital patient transport

• Vehicle-based operations in confined spaces

Can’t find the right set for you? No problem! We’d be happy to put together bespoke sets for you, perfectly tailored to your needs. 

Astronaut-style cap designed to reliably cover the head, hair, and neck in hygiene-critical work environments. The antistatic-treated non-woven fabric meets high hygiene standards and provides a custom fit for the wearer.

The MediCap AstroEco REF 121G was designed for hygiene-critical work areas where comprehensive coverage of the head, hair, and neck is required. Its astronaut-style design provides extensive coverage and helps ensure compliance with strict hygiene standards in sensitive work environments.

The hood is classified as a Class I medical device and is made of antistatic-treated polypropylene nonwoven fabric. The astronaut-style design consists of a head section and a wraparound section, ensuring that the head and neck are reliably covered. Both components are joined together with an overlock seam, ensuring a sturdy construction. The wraparound section can also be used to tie the hood, allowing for a custom fit. The non-woven fabric used is antistatic and suitable for use in controlled environments. Latex-free elastic components contribute to a comfortable fit and minimize the risk of latex allergies. The green design facilitates visual identification within various hygiene areas. When stored properly, the cap has a shelf life of up to 10 years.

Examples of use

The latex-free hood, Ø 61cm, offers long-lasting comfort and is available in a range of colours to clearly identify different work areas. Particle emission has been tested in accordance with IEST-RP-CC003.5.

The latex-free hood, Ø 53 cm, offers long-lasting comfort and is available in a range of colours to clearly identify different work areas. Particle emission has been tested in accordance with IEST-RP-CC003.5.

The cap is made of pure polypropylene and is classified as both Category I PPE and a Class I medical device. The classic cap shape provides full coverage of the hair and helps reduce the risk of contamination in sensitive work environments. The outer edge is formed by an overlock-seamed elastic band made of latex-free synthetic elastomer, which ensures a secure and comfortable fit. The soft non-woven material contributes to a comfortable wearing experience even during extended periods of use. The product complies with the HACCP concept and is suitable for use in areas with high standards for hygiene and product protection. Dermatological testing revealed no adverse reactions. With a diameter of 61 cm, the cap offers sufficient space for various hairstyles and hair volumes. It is available in blue, white, and green. 

Cap, Ø 50 cm, made from soft polypropylene non-woven fabric for reliable hair coverage in hygiene-critical work areas. The compact clip-on design allows for space-saving storage and quick retrieval during the working day.