Skip to Content
Pricelist: Standardpreis Pricelist
Pricelist: Standardpreis Pricelist
Protective gown IsoCoat 360 4B, Type PB [4]-B

Protective gown IsoCoat 360 4B, Type PB [4]-B

REF

Packaging

44B01/WT/M

Carton (50 pcs)

Bag (5 pcs)

Pallet (40 x 50 pcs)

This certified lab coat provides protection against chemicals and infectious agents and is spray-resistant. Sealed seams and an extra-wide waistband ensure a secure fit.

The IsoCoat 360 4B REF 44B01/WT is designed for particularly demanding work environments where comprehensive protection against liquid chemicals and biological hazards is required. The all-around protection covering the front and back, as well as the taped seams, provide a high level of protection even under heavy use.

The protective gown is made of PP nonwoven fabric with a microporous PE coating and is classified as both Category III PPE and a Class I medical device. Certification according to EN 14605 Type PB [4]-B confirms protection against liquid chemicals in the form of spray mists, while EN 14126 verifies protection against blood, viruses, bacteria, contaminated particles, and liquid aerosols. All seams are taped to ensure a high level of impermeability. The neck closure, elastic latex-free knitted cuffs, and a tie belt ensure a secure fit and reliable coverage, even when worn with protective gloves. In the Helmke Drum Test according to IEST-RP-CC003.4, the material achieved Category III and is recommended for cleanrooms in accordance with DIN EN ISO 14644-1, ISO Classes 7 to 9. Its high mechanical strength is demonstrated by an abrasion resistance of over 500 cycles, a flexural tear resistance of 100,000 cycles, a puncture resistance of over 10 N, and a seam strength of over 75 N. Against sulfuric acid (30%), sodium hydroxide (10%), o-xylene, and butan-1-ol, repellency indices of over 95% and penetration indices of under 1% were achieved in each case. In terms of protection against infectious agents, resistance to the penetration of contaminated liquids containing bacteriophages of 20 kPa (EN Class 6) and resistance to mechanically transmitted infectious agents for over 75 minutes (EN Class 6) were demonstrated, among other things.

Examples of use
  • Care for patients with suspected infectious diseases
  • Activities in isolation and quarantine areas
  • Working in microbiology laboratories
  • Handling of Biological Hazardous Substances in Biotechnology
  • Cleaning and decontamination work in contaminated areas
  • Activities involving spray mist or liquid chemicals
  • Emergency medical service operations under heightened infection control requirements

  • - - -
  • Size
  • Category
  • Chemical Protective Clothing Protection Class
  • Chemical Protective Clothing Standards
  • Cleanroom Recommendation
  • General Standards
  • Material
Preis nach Login sichtbar
Kontaktieren Sie uns

Description

This certified lab coat provides protection against chemicals and infectious agents and is spray-resistant. Sealed seams and an extra-wide waistband ensure a secure fit.

The IsoCoat 360 4B REF 44B01/WT is designed for particularly demanding work environments where comprehensive protection against liquid chemicals and biological hazards is required. The all-around protection covering the front and back, as well as the taped seams, provide a high level of protection even under heavy use.

The protective gown is made of PP nonwoven fabric with a microporous PE coating and is classified as both Category III PPE and a Class I medical device. Certification according to EN 14605 Type PB [4]-B confirms protection against liquid chemicals in the form of spray mists, while EN 14126 verifies protection against blood, viruses, bacteria, contaminated particles, and liquid aerosols. All seams are taped to ensure a high level of impermeability. The neck closure, elastic latex-free knitted cuffs, and a tie belt ensure a secure fit and reliable coverage, even when worn with protective gloves. In the Helmke Drum Test according to IEST-RP-CC003.4, the material achieved Category III and is recommended for cleanrooms in accordance with DIN EN ISO 14644-1, ISO Classes 7 to 9. Its high mechanical strength is demonstrated by an abrasion resistance of over 500 cycles, a flexural tear resistance of 100,000 cycles, a puncture resistance of over 10 N, and a seam strength of over 75 N. Against sulfuric acid (30%), sodium hydroxide (10%), o-xylene, and butan-1-ol, repellency indices of over 95% and penetration indices of under 1% were achieved in each case. In terms of protection against infectious agents, resistance to the penetration of contaminated liquids containing bacteriophages of 20 kPa (EN Class 6) and resistance to mechanically transmitted infectious agents for over 75 minutes (EN Class 6) were demonstrated, among other things.

Examples of use
  • Care for patients with suspected infectious diseases
  • Activities in isolation and quarantine areas
  • Working in microbiology laboratories
  • Handling of Biological Hazardous Substances in Biotechnology
  • Cleaning and decontamination work in contaminated areas
  • Activities involving spray mist or liquid chemicals
  • Emergency medical service operations under heightened infection control requirements

Specifications

Size M, L, XL
Category PPE CAT III, MD Cl. I
Chemical Protective Clothing Protection Class Type 4B
Chemical Protective Clothing Standards EN 14605, EN 13688, EN 14126, EN 14325
Cleanroom Recommendation Helmke-Drum Cat. III, IEST-RP-CC003.5, ISO Klasse 7 - 9, ISO 14644-1, EU GMP
General Standards Reg. (EU) 2016/425, Reg. (EU) 2017/745
Material Polypropylene with microporous polyethylene coating