Skip to Content
  1. Products
  2. Branchen

Branchen

[216/B] Medical face mask Model D Loop, Type IIR (Blue)

Medical face mask Model D Loop, Type IIR

REF 216
Tested in accordance with all applicable European medical standards, the product offers a high level of comfort thanks to its low breathing resistance and skin-friendly material—even during prolonged use.

Reliable patient protection in everyday clinical practice – the Model D Loop is a Type IIR medical face mask that combines maximum comfort and proven protection for healthcare professionals thanks to its anatomical shape, skin-friendly material, and soft ear loops.

The Model D Loop features a three-layer construction with polypropylene spunbond fabric on the outside and inside, as well as a polypropylene microfiber filter medium, complemented by soft polypropylene-elastane ear loops and an easily moldable HDPE nose clip. The anatomically shaped mask adapts individually to any face shape thanks to the flexible nose clip and fits securely and tightly without slipping. The inner and outer layers are physiologically safe, phthalate-free, odorless, and latex-free—for maximum comfort even for people with sensitive skin or allergies. With a bacterial filtration efficiency of over 99% and a splash resistance of 16.0 kPa, the mask reliably meets Type IIR requirements, thereby protecting both medical staff and patients from droplets and splashes. The practical dispenser box containing 50 masks allows for hygienic dispensing directly at the workplace—quickly, cleanly, and without interrupting workflow.

Examples of use:
  • • Treatment of patients in clinics and hospitals
  • • Product protection in food processing facilities

→
[202] Medical face mask OP-Maske, Type II

Medical face mask OP-Maske, Type II

REF 202
Medical surgical mask with high bacterial filtration efficiency for daily use in hospitals, medical practices, and healthcare settings. Soft ear loops and low breathing resistance ensure high comfort during extended periods of wear.

The REF 202 surgical mask provides reliable basic medical protection for daily use in hospitals, medical practices, and care facilities. The combination of high filtration efficiency, low breathing resistance, and comfortable ear loops ensures a comfortable fit even during extended periods of wear.

The medical face mask is classified as a Class I medical device and meets the requirements of EN 14683:2019+AC:2019 as a Type II mask. The anatomically shaped design with an easily moldable nose clip allows for individual adjustment to the shape of the face and ensures a secure fit. The inner and outer layers are made of skin-friendly, hypoallergenic, and phthalate-free polypropylene nonwoven fabric. The polypropylene microfiber filter medium achieves a bacterial filtration efficiency (BFE) of 99.8% and provides a reliable barrier against bacteria. The mask is equipped with soft, latex-free ear loops made of polyester and polyurethane, ensuring comfortable wear. With a pressure difference of only 25 Pa/cm², it offers very low breathing resistance and supports comfortable breathing even during extended wear. The microbiological purity of ≤ 5.94 CFU/g is well below the permissible limit of ≤ 30 CFU/g. Dermatological testing revealed no contraindications. All materials used are free of irritants, meet the requirements for biocompatibility according to ISO 10993, and are suitable for medical applications.

Examples of use
  • Patient care provided by healthcare professionals
  • Examinations and Treatments in Everyday Practice
  • Care and support services
  • Work in outpatient clinics and emergency rooms

→
[101/W] Disposable cap ClipCap, in bag (White)

Disposable cap ClipCap, in bag

REF 101
Disposable hairnet, Ø 50 cm, made from soft polypropylene non-woven fabric for reliable hair coverage in hygiene-critical work areas. The compact clip-on design allows for space-saving storage and quick access during everyday work.

The ClipCap REF 101 offers a space-saving and cost-effective solution for hygienic hair coverage in sensitive work areas. Thanks to its compact clip design, it is easy to store, quick to remove, and can be unfolded into a full-size cap in just a few simple steps when needed.

The ClipCap is made of soft polypropylene nonwoven fabric and is classified as both Category I PPE and a Class I medical device. The cap is supplied in a compact form as a folded strip and unfolds into a round cap simply by pulling it apart. This design allows for space-saving storage and quick deployment during daily work. The outer edge features a heat-sealed elastic band made of synthetic, latex-free elastomer, ensuring a secure and comfortable fit. The soft non-woven material ensures a comfortable feel even during extended wear. The ClipCap complies with the HACCP concept and is suitable for hygiene-critical work areas where reliable hair coverage is required. Dermatological testing revealed no adverse reactions. The product is available in blue and white and has a shelf life of up to 10 years when stored properly.

Examples of use
  • Hair Coverings in Food Production and Processing
  • Hygiene Practices in Hospitals and Nursing Facilities
  • Working in pharmaceutical production areas
  • General hygiene measures in production and work areas

→
[52W/S] Overall Easy (S)

Overall Easy

REF 52W
The coverall is made of durable non-woven fabric and features a secure fit thanks to its built-in hood and elastic cuffs at the arms and legs.

The Easy REF 52W coverall offers a simple and cost-effective solution for hygiene-critical work areas where people and clothing need to be protected from contamination. The lightweight material and wide range of sizes ensure a comfortable fit for a wide variety of users.

The protective suit is made of 100% polypropylene nonwoven fabric and is classified as Category I PPE. All materials used are free of irritants and ensure a comfortable fit even during extended periods of use. Elastic cuffs made of latex-free polyurethane elastomer ensure a secure fit and make the suit easy to put on and take off. The coverall is available in sizes S through XXXL and accommodates heights from 162 to 200 cm and chest circumferences from 84 to 132 cm. The white version is particularly suitable for areas with high standards of cleanliness and hygiene. Thanks to its lightweight construction, the coverall can be flexibly used as protective clothing for visitors, employees, or short-term tasks. Furthermore, no adverse reactions were observed during dermatological compatibility testing. The coverall is intended for single-use and supports compliance with hygienic work procedures.

Examples of use
  • Production work in areas with strict hygiene requirements
  • Protecting clothing during inspections and patrols
  • General Personal Safety in Production and Warehouse Areas

→
[53/G/L] Overall Classic (Green, L)

Overall Classic

REF 53
Disposable coveralls made of polypropylene nonwoven fabric for protecting clothing and personnel in hygiene-critical work areas. The generous cut and integrated hood ensure high comfort and comprehensive coverage.

The Classic REF 53 coverall offers a simple and comfortable solution for hygiene-critical work areas where clothing and personnel need to be protected from contamination. The generous cut and well-thought-out design ensure a high degree of freedom of movement and comfort throughout the workday.

The protective suit is made of pure polypropylene non-woven fabric and is classified as Category I PPE. The material is free of irritants and is suitable for use in a wide variety of work environments. The coverall features long sleeves, long legs, and a permanently sewn-in hood, providing comprehensive coverage of the body and clothing. The front opening with a polyester zipper makes it easy to put on and take off. Elastic, latex-free cuffs around the face, arms, legs, and waist ensure a secure fit and maintain a comfortable fit while working. The sizes have been deliberately designed to be generous and exceed the standard sizes specified for Europe and the USA in order to optimize freedom of movement. The product complies with the HACCP concept and supports adherence to high hygiene standards in production and work areas. The coveralls are available in blue in sizes S through XXXL and in green in sizes L through XXL.

Examples of use
  • Production work in the food industry
  • Cleaning and maintenance work with heightened hygiene requirements
  • Picking and logistics operations in controlled areas
  • General clothing protection for production and inspection activities

→
[572/M] Protective Coverall AllSafe+, Type 5B, 6B (M)

Protective Coverall AllSafe+, Type 5B, 6B

REF 572

Protects against chemical splashes and infectious agents, and remains comfortable to wear thanks to its breathable material. Elastic cuffs ensure a secure fit.

The AllSafe+ REF 572 was developed for demanding applications where protection against solid particles, infectious agents, and limited chemical splashes is required. The combination of high protection, breathable material, and an ergonomic fit ensures safe and comfortable work, even during extended use.

The protective coverall is certified as Category III PPE and meets the requirements for protection types 5-B and 6-B according to EN ISO 13982-1, EN 13034, and EN 14126. The multi-layer material combines a soft, skin-friendly nonwoven fabric on the inside with a microporous PE film on the outside, which is breathable yet liquid-repellent. The ergonomic cut with long sleeves, long pant legs, and a hood ensures a high degree of freedom of movement and a secure fit. The two-way zipper with a self-adhesive cover extends to the chin and provides additional protection for the neck area. Elastic on the hood, sleeves, pant legs, and waist improve the fit and minimize open gaps. The material is particularly lint-free, making it suitable for sensitive work environments. The material has been extensively tested for mechanical durability. Protection against chemicals and infectious agents is verified by standard-compliant tests. Additionally, the suit meets the requirements of EN 1149-5 for electrostatic properties and EN 1073-2 for protection against radioactive contamination from solid particles.

Examples of use
  • Handling of infectious materials and biological hazards
  • Cleaning and decontamination procedures
  • Working in environments with limited exposure to chemical splashes and spray mist
  • Protective measures in nuclear and radiologically controlled environments

→
[59C/M] Chemical Protective Coverall, Type 3B, 4B, 5B, 6B (M)

Chemical Protective Coverall, Type 3B, 4B, 5B, 6B

REF 59C
Chemical protective suit for working with hazardous chemicals, particles, and biological hazards. Heat-sealed and taped seams provide a reliable barrier even in demanding applications.

The REF 59C protective suit has been developed for demanding work involving hazardous chemicals and biological risks. The suit combines comprehensive full-body protection with a high degree of freedom of movement and offers reliable safety even when working under pressure of up to 1.5 bar.

This Category III PPE chemical protection suit complies with protection types 3, 4, 5 and 6 in accordance with the relevant European standards. The material consists of an SMS polypropylene non-woven fabric laminated with PE film and provides reliable protection against liquid chemicals, solid particles, infectious agents and radioactive contamination from solid particles. The ergonomic cut and elasticated waist ensure a comfortable fit and a high degree of freedom of movement, even during prolonged use. Elasticated cuffs with integrated thumb loops ensure a secure fit when worn over protective gloves. The comfortable hood stays securely in place even when worn with a respirator and safety goggles, and does not slip whilst working. A double two-way zip with a self-adhesive cover flap and extended chin guard provides increased protection against liquid ingress. All seams are heat-sealed and additionally taped to prevent liquids from seeping in through the seams. Reinforced knee areas enhance safety and durability when kneeling. 

Examples of use
  • Working with liquid chemicals that pose a high risk of exposure
  • Decontamination and cleaning procedures
  • Maintenance and repair work in chemical plants
  • Remediation work involving hazardous materials
→
[415] Disposable gown ComfortCoat

Disposable gown ComfortCoat

REF 415
Disposable gowns made of soft polypropylene nonwoven fabric for hygiene-critical work environments in healthcare, nursing, and manufacturing. Knitted cuffs ensure a comfortable fit and make the gowns pleasant to wear during the workday.

The ComfortCoat REF 415 offers a comfortable and hygienic solution for daily use in medical and production-related work environments. The soft non-woven fabric and knitted cuffs ensure a comfortable fit and allow for comfortable work even over extended periods.

The disposable gown is made of pure polypropylene nonwoven fabric and is classified as both a Class I medical device and Category I PPE. The soft material offers high comfort and is suitable for a wide range of hygiene-critical applications. The opening at the back allows for easy donning and doffing, while two tie belts ensure a custom fit and secure hold. Knitted polyester cuffs provide a comfortable fit at the wrist and improve the fit while working. With a length of 125 cm and a width of 145 cm, the gown offers generous coverage of clothing. The design complies with the HACCP concept and supports adherence to high hygiene standards. Furthermore, no adverse reactions were observed during dermatological compatibility testing. The dark green color allows for easy visual identification within workplace hygiene protocols.

Examples of use
  • Patient care provided by healthcare professionals
  • Hygiene Practices in Long-Term Care Facilities
  • Production work in the food industry
  • Visitor access to sensitive work areas

→
[9015/W] Visitor's Kit (White)

Visitor's Kit

REF 9015
Individually packaged hygiene kits, consisting of a disposable gown and a disposable cap. The skin-friendly, breathable material ensures a high level of comfort.

The visitor kit enables visitors to be kitted out quickly and hygienically in sensitive areas. Thanks to its practical, individually sealed packaging, it ensures clean distribution and immediate readiness for use.

The visitor’s kit consists of a disposable gown and a disposable cap made from soft non-woven fabric, each individually heat-sealed in a hygienic bag, ensuring clean and safe provision. The examination gown is open at the front and can be easily fastened using a Velcro fastener, allowing for quick handling and making the process of putting it on and taking it off significantly easier. The cuffs are fitted with elasticated bands free from natural latex, thereby eliminating the risk of latex allergies. The included beret-style cap with a peak is also made of soft non-woven fabric and features a latex-free elasticated band at the back, ensuring a comfortable and secure fit. Both components are classified as Category I PPE and are therefore suitable for basic protection requirements, e.g. as visitor clothing. The set complies with the HACCP concept and is therefore suitable for use in hygiene-sensitive areas. As it is available in white or red, the visitor set can also be flexibly integrated into various hygiene concepts.

Examples of use:
  • • Providing visitors with equipment during guided tours of the production facilities
  • • Use by external service providers such as maintenance or cleaning staff
  • • Short-term assignments in food businesses in accordance with HACCP guidelines
  • • Provision of protective clothing for guests in controlled hygiene areas
→
[44B01/WT/M] Protective gown IsoCoat 360 4B, Type PB [4]-B (M)

Protective gown IsoCoat 360 4B, Type PB [4]-B

REF 44B01
This certified lab coat provides protection against chemicals and infectious agents and is spray-resistant. Sealed seams and an extra-wide waistband ensure a secure fit.

The IsoCoat 360 4B REF 44B01/WT is designed for particularly demanding work environments where comprehensive protection against liquid chemicals and biological hazards is required. The all-around protection covering the front and back, as well as the taped seams, provide a high level of protection even under heavy use.

The protective gown is made of PP nonwoven fabric with a microporous PE coating and is classified as both Category III PPE and a Class I medical device. Certification according to EN 14605 Type PB [4]-B confirms protection against liquid chemicals in the form of spray mists, while EN 14126 verifies protection against blood, viruses, bacteria, contaminated particles, and liquid aerosols. All seams are taped to ensure a high level of impermeability. The neck closure, elastic latex-free knitted cuffs, and a tie belt ensure a secure fit and reliable coverage, even when worn with protective gloves. In the Helmke Drum Test according to IEST-RP-CC003.4, the material achieved Category III and is recommended for cleanrooms in accordance with DIN EN ISO 14644-1, ISO Classes 7 to 9. Its high mechanical strength is demonstrated by an abrasion resistance of over 500 cycles, a flexural tear resistance of 100,000 cycles, a puncture resistance of over 10 N, and a seam strength of over 75 N. Against sulfuric acid (30%), sodium hydroxide (10%), o-xylene, and butan-1-ol, repellency indices of over 95% and penetration indices of under 1% were achieved in each case. In terms of protection against infectious agents, resistance to the penetration of contaminated liquids containing bacteriophages of 20 kPa (EN Class 6) and resistance to mechanically transmitted infectious agents for over 75 minutes (EN Class 6) were demonstrated, among other things.

Examples of use
  • Care for patients with suspected infectious diseases
  • Activities in isolation and quarantine areas
  • Working in microbiology laboratories
  • Handling of Biological Hazardous Substances in Biotechnology
  • Cleaning and decontamination work in contaminated areas
  • Activities involving spray mist or liquid chemicals
  • Emergency medical service operations under heightened infection control requirements

→
[4S02/BL/XL] Surgical gown EcoCoat Splash S, sterile (XL)

Surgical gown EcoCoat Splash S, sterile

REF 4S02
Sterile surgical gown with a reinforced protective barrier for surgical procedures involving high fluid volume. The multi-layer material construction offers high fluid resistance and reliable protection in the sterile operating room environment.

The EcoCoat Splash S was developed for surgical procedures involving high fluid exposure and offers a reinforced protective barrier for demanding surgical applications. The multi-layer material construction combines high fluid resistance with reliable bacterial protection and supports safe workflows in a sterile environment.

The sterile surgical gown is classified as a Class I medical device and is manufactured in accordance with EN ISO 13485:2016. The reinforced 5-layer construction on the front and sleeves provides enhanced protection against the penetration of liquids and bacteria. The low-lint, abrasion-resistant gown is ultrasonically welded. The medical-grade folding design allows for user-friendly removal and facilitates sterile donning. The opening at the back, Velcro fastener on the collar, two tie belts, and knitted cuffs ensure a secure and comfortable fit. The gown is free of natural latex and intended for single-use. Sterilization is performed using ethylene oxide. The gown meets the requirements for surgical gowns in the “High” performance class according to the EN 13795 standard.

Examples of use
  • Performing surgical procedures by surgeons and surgical assistants
  • Sterile procedures in the operating room
  • Preparation for and support during surgical procedures
  • Working in sterile treatment and procedure rooms

→
[437/M] Protective gown IsoCoat, Type PB [6]-B (M)

Protective gown IsoCoat, Type PB [6]-B

REF 437
Protective coveralls that provide comprehensive protection against viruses, bacteria, and contaminated liquids for applications with heightened infection control requirements. The all-around protective design ensures reliable coverage of the front and back.

The IsoCoat REF 437 was developed for demanding work environments where reliable protection against biological hazards is required. Its all-around protective design provides a high level of barrier protection against infectious agents and supports safe work procedures in sensitive medical, healthcare, and industrial settings.

The protective gown is made of PE-coated PP nonwoven fabric and is classified as both Category III PPE and a Class I medical device. Certification to EN 14126 confirms protection against blood, viruses, bacteria, contaminated particles, and liquid aerosols. The gown provides full protection on the front and back, making it suitable for applications with increased infection control requirements. The fastening straps at the neck, the tie belt at the waist, and the latex-free elastic knit cuffs ensure a secure fit and reliable coverage, even when worn with protective gloves. In the Helmke Drum Test according to IEST-RP-CC003.4, the material achieved Category II and is recommended for cleanrooms in accordance with DIN EN ISO 14644-1, ISO Classes 6 through 9. The high material durability is demonstrated by a flexural tear resistance of over 100,000 cycles, a tear strength of over 30 N, and a puncture resistance of over 5 N. In the area of infection control, resistance to the penetration of contaminated liquids containing bacteriophages of 20 kPa (EN Class 6) and resistance to mechanically transmitted infectious agents of over 75 minutes (EN Class 6) were demonstrated. The lab coat has not been tested for chemical resistance and is not suitable for handling o-xylene, butan-1-ol, or other organic chemicals.

Examples of use
  • Care for patients with infectious diseases
  • Emergency medical service operations under heightened infection control requirements
  • Working in biotechnology production and research facilities
  • Activities in the fields of veterinary medicine and animal welfare
  • Cleaning and decontamination work in contaminated environments

→
[435/M] Protective gown IsoCoat Zytex®, Type PB [6]-B (M)

Protective gown IsoCoat Zytex®, Type PB [6]-B

REF 435
Protective gowns for handling cytostatic drugs and for applications with heightened infection control requirements. The Zytex® material provides a reliable barrier against contaminated liquids, particles, and biological hazards.

The IsoCoat Zytex® REF 435 was developed for demanding applications where infection control and the safe handling of cytostatic drugs are paramount. Its all-around protective design and specially developed Zytex® material provide a reliable barrier in sensitive medical and pharmaceutical work areas.

The protective gown is made of an SMS-PP nonwoven fabric with a PE coating and is classified as both Category III PPE and a Class I medical device. Certification according to EN 13034 Type PB [6]-B confirms protection against liquid chemicals with limited protective performance, while EN 14126 verifies protection against blood, viruses, bacteria, contaminated particles, and liquid aerosols. The material was additionally tested for the permeation of cytostatic drugs in accordance with EN ISO 6529 and achieved a breakthrough time of over 480 minutes (EN Class 6) for cytostatic drugs (5 mg/ml). The gown is fastened at the neck with ties, while latex-free elastic knit cuffs and a drawstring belt ensure a secure fit and reliable coverage. Its high mechanical strength is demonstrated by a flexural tear resistance of 100,000 cycles, a tear strength of over 30 N, and a seam strength of over 50 N. Against 30% sulfuric acid and 10% sodium hydroxide, repellency indices of over 90% and penetration indices of less than 1% were achieved. In the area of infection control, resistance to the penetration of infectious agents through mechanical contact for over 75 minutes (EN Class 6) was demonstrated, among other things. The lab coat is expressly not suitable for handling o-xylene, butan-1-ol, or other organic chemicals.

Examples of use
  • Preparation and Reconstitution of Antineoplastic Drugs
  • Administration of chemotherapy drugs by healthcare professionals
  • Work in oncology outpatient clinics and wards
  • Precautions for MRSA or Norovirus Management
  • Working in Cleanrooms in the Pharmaceutical Industry

→
[474] Cleanroom gown Pro, Type PB [6]-B

Cleanroom gown Pro, Type PB [6]-B

REF 474
The lab coat is made of breathable, liquid-repellent SMS trilaminate and is electrostatically dissipative. A snap closure, an inside pocket, and elastic cuffs ensure a secure fit.

The Pro REF 474 cleanroom gown is designed for demanding cleanroom and production environments where, in addition to low particle shedding, protection against liquid chemicals and electrostatic discharge is required. The durable trilaminate material combines high comfort with proven protective performance for sensitive work areas.

The Pro cleanroom gown is made of an antistatic-treated trilaminate composed of 100% polypropylene and is classified as Category III PPE. The material meets the requirements of EN 13034 Type PB[6] for limited protection against liquid chemicals, as well as EN 1149-5 for electrostatic properties. The front opening with snap fasteners allows for easy donning and doffing, while a sewn-in inner pocket offers additional practical benefits. The sleeves are equipped with an elastic band edged with an overlock seam, which ensures a secure fit at the wrist. In the Helmke Drum Test according to IEST-RP-CC003.4, the material achieved Category II and is recommended for cleanrooms in accordance with DIN EN ISO 14644-1 for ISO Classes 6 through 9. Its high mechanical strength is demonstrated by an abrasion resistance of over 500 cycles, a tensile strength of over 100 N crosswise and over 60 N lengthwise, and a seam strength of over 75 N. Against 30% sulfuric acid and 10% sodium hydroxide, a repellency index of over 95% and a penetration index of less than 1% were achieved in each case (EN ISO 6530). The one-size-fits-all design, measuring 105 cm in length and 140 cm in width, is suitable for individuals between 160 and 190 cm in height.

Examples of use
  • Production work in cleanrooms in the pharmaceutical industry
  • Assembly and manufacturing processes in the electronics industry
  • Work in laboratories and research areas
  • Quality controls in controlled production environments
  • Working in material and personnel airlocks

→
[491W] PE-Visitor Gown

PE-Visitor Gown

REF 491W
Visitor gowns made of durable PE film to protect clothing in areas with strict hygiene requirements. The snap-button front opening allows for quick donning and doffing during visitor tours and inspections.

The REF 491W PE visitor gown offers a simple and hygienic solution for visitors and employees in sensitive work areas. Its seamless film construction helps protect clothing and contributes to compliance with workplace hygiene standards.

The visitor gown is made of 15-micron-thick PE film and is classified as Category I PPE. The material forms a reliable barrier between clothing and the work environment and is suitable for short-term use in hygiene-critical areas. The front opening with snap fasteners allows for quick donning and doffing and facilitates easy access for visitors. Welded seams ensure a sealed construction and support the gown’s functionality in daily use. The integrated collar provides full coverage of the upper body. With a length of 125 cm, the visitor gown offers extensive coverage of the clothing worn underneath. The design complies with the HACCP concept and was specifically developed for single-use. Furthermore, no adverse reactions were observed during dermatological compatibility testing.

Examples of use
  • Site visits by visitors and external service providers
  • Hygienic production areas in the food industry
  • Visits to pharmaceutical manufacturing facilities
  • Inspections and audits in sensitive work areas
  • Temporary clothing protection during maintenance and inspection work

→
[472W/M] Cleanroom Gown (M)

Cleanroom Gown

REF 472W
This disposable lab coat, made of durable non-woven fabric, fastens at the front with snap fasteners and stays securely in place thanks to elastic cuffs. It is suitable for product protection in accordance with IEST-RP-CC003.5.

The REF 472 cleanroom gown is designed for controlled production environments where low particle shedding and high hygiene standards are critical. The durable non-woven fabric and cleanroom suitability up to ISO Class 6 support reliable workflows in sensitive areas.

The cleanroom gown is made of durable polypropylene nonwoven fabric and is classified as Category I PPE. In the Helmke Drum Test in accordance with IEST-RP-CC003.4, the material achieved Category II and is suitable for use in cleanrooms according to DIN EN ISO 14644-1 in ISO Classes 6 through 9. The front opening with snap fasteners allows for easy donning and doffing, while the sewn-in inner pocket offers practical storage for work tools. The sleeves are equipped with an elastic band edged with an overlock seam, ensuring a secure fit at the wrist. The elastic band, made of synthetic elastomer, is free of natural latex. The design complies with the HACCP concept and supports adherence to high hygiene requirements in controlled environments. Furthermore, no intolerance reactions were observed during dermatological compatibility testing. The cleanroom gown is available in sizes M (100 cm length) and L (105 cm length) and was specifically developed for use in particle-controlled work areas.

Examples of use
  • Production work in cleanrooms in the pharmaceutical industry
  • Assembly and manufacturing processes in the electronics industry
  • Work in laboratories and research areas
  • Quality controls in controlled production environments
  • Working in material and personnel airlocks

→
[455/W/L] Inspection Gown (White)

Inspection Gown

REF 455
Inspection gowns made of polypropylene nonwoven fabric for visitors, inspection staff, and employees in hygiene-critical work areas. The Velcro fastener allows for quick donning and doffing and supports efficient workflows in daily operations.

The REF 455 inspection gown offers a practical and hygienic solution for visitors, employees, and inspection staff in sensitive work areas. The comfortable front opening with a Velcro fastener allows for quick donning and doffing and supports efficient workflows in daily operations.

The inspection gown is made of soft polypropylene nonwoven fabric and is classified as Category I PPE. The front opening with a hook-and-loop fastener allows for easy handling and makes it simple to put on for users who change frequently. The outer edge of the sleeves is formed by an elastic band edged with an overlock seam, which ensures a secure fit at the wrist. The elastic band used, made of synthetic elastomer, is free of natural latex. With a length of 115 cm, the gown provides reliable coverage of the clothing worn underneath. The design complies with the HACCP concept and supports adherence to high hygiene standards in controlled work environments. Furthermore, no adverse reactions were observed during dermatological compatibility testing. The availability in blue, green, red, white, and yellow allows for color-coding of different areas, visitor groups, or hygiene levels.

Examples of use
  • Site visits by visitors and external service providers
  • Quality and hygiene controls in production areas
  • Inspection and audit activities performed by qualified personnel
  • Inspections during production

→
[426Y] Protective gown IsoCoat Zytex® 360

Protective gown IsoCoat Zytex® 360

REF 426Y
The liquid-repellent protective gown, which is 160 cm long, is closed at the front and is securely fastened with ties at the neck and waist. Knitted cuffs enhance comfort. The material has been tested for resistance to infectious agents and cytostatic drugs.

The IsoCoat Zytex® 360 REF 426Y was specifically designed for applications that require both infection control and safe handling of cytostatic drugs. The extended version offers a particularly large protective surface area and provides comprehensive protection in sensitive medical and pharmaceutical work areas.

The isolation gown is made of the specialized material Zytex® and is classified as both Category I PPE and a Class I medical device. The material has been tested in accordance with EN 14126 for protection against the penetration of blood and viruses and additionally tested in accordance with EN ISO 6529 for the permeation of cytostatic drugs. Zytex® was specifically developed for handling cytostatic drugs and exhibits high impermeability to these active substances. The opening at the back allows for easy donning and doffing, while two tie belts ensure a secure and individually adjustable fit. Knitted polyester cuffs provide a reliable seal at the wrist and improve coverage when worn with protective gloves. In the Helmke Drum Test according to IEST-RP-CC003.4, the material achieved Category I and is recommended for cleanrooms in accordance with DIN EN ISO 14644-1, ISO Classes 6 through 9. With a length of 160 cm, the gown offers particularly extensive coverage and is suitable for applications where an extended protection area is desired. Furthermore, no intolerance reactions were observed during dermatological compatibility testing.

Examples of use
  • Preparation and Reconstitution of Antineoplastic Drugs
  • Administration of chemotherapy drugs by healthcare professionals
  • Work in oncology outpatient clinics and wards
  • Precautions for MRSA or Norovirus Management
  • Working in Cleanrooms in the Pharmaceutical Industry

→
[425Y] Protective gown IsoCoat Zytex® 360

Protective gown IsoCoat Zytex® 360

REF 425Y
The liquid-repellent protective gown, which is 130 cm long, is closed at the front and is securely fastened with ties at the neck and waist. Knitted cuffs enhance comfort. The material has been tested for resistance to infectious agents and cytostatic drugs.

The IsoCoat Zytex® 360 REF 425Y was specifically designed for applications where both infection control and the safe handling of cytostatic drugs are key priorities. The specially developed Zytex® material provides a high level of protection and helps safeguard healthcare professionals in demanding work environments.

The isolation gown is made of the specialized material Zytex® and is classified as both Category I PPE and a Class I medical device. The material has been tested in accordance with EN 14126 for protection against the penetration of blood and viruses and additionally tested in accordance with EN ISO 6529 for the permeation of cytostatic drugs. Zytex® was specifically developed for handling cytostatic drugs and exhibits high impermeability to these active substances. The opening at the back allows for easy donning and doffing, while two tie belts ensure a secure and individually adjustable fit. Knitted polyester cuffs provide a reliable seal at the wrist and improve coverage when worn with protective gloves. In the Helmke Drum Test according to IEST-RP-CC003.4, the material achieved Category II and is recommended for cleanrooms in accordance with DIN EN ISO 14644-1, ISO Classes 6 through 9. With a length of 130 cm, the gown offers extensive coverage and is suitable for use in sensitive medical and pharmaceutical areas. Furthermore, no adverse reactions were observed during the dermatological compatibility test.

Examples of use
  • Administration of chemotherapy drugs by healthcare professionals
  • Work in oncology outpatient clinics and wards
  • Precautions for MRSA or Norovirus Management
  • Working in Cleanrooms in the Pharmaceutical Industry

→
[421/B] Protective gown SplashCoat+ (Blue)

Protective gown SplashCoat+

REF 421
The partially coated protective gown features a liquid-repellent front and coated sleeves for enhanced protection. The breathable back material ensures high comfort even during prolonged wear, while elastic cuffs securely fasten the sleeves at the wrists and prevent them from riding up.

The SplashCoat+ REF 421 was developed for applications that require enhanced protection in the front area combined with comfortable wearability. The tested protective zones on the front and sleeves provide a reliable barrier against biological hazards, while the breathable back panel ensures comfort during everyday work.

The front panel and sleeves of the gown are made of Splash+ fabric, which has been tested for resistance to bacterial and viral penetration in accordance with EN 14126. The back panel, made of thin polypropylene nonwoven fabric, ensures high breathability and helps maintain a comfortable body temperature even during extended wear. The opening at the back makes it easy to put on and take off. Two tie straps at the collar and two tie belts ensure a secure and individually adjustable fit. The sleeves are equipped with an overlock-seamed elastic band made of synthetic elastomer, which is free of natural latex and ensures a reliable seal at the wrist. The product complies with the HACCP concept and supports adherence to high hygiene standards. In material testing, the Splash+ material achieved performance level 6 for resistance to the penetration of contaminated liquids under hydrostatic pressure, as well as performance level 6 for resistance to the penetration of infectious agents due to mechanical contact. In addition, performance levels 3 were achieved against contaminated liquid aerosols and 3 against contaminated solid particles. Furthermore, no adverse reactions were observed during dermatological compatibility testing.

Examples of use
  • Patient care involving increased contact with fluids
  • Providing emergency medical care to patients with infectious diseases
  • Care and treatment measures in hospitals and long-term care facilities
  • Precautionary measures in cases of suspected communicable infectious diseases

→