Protective clothing for inpatient and outpatient care

Our innovative filter material for the Made-in-Germany Neolution®Air Loop respirator ensures maximum FFP3 filtration performance with low breathing resistance and particle release tested in accordance with IEST-RP-CC003.5. Convenient ear loops make it easy to use.

The highest level of respiratory protection meets medical environmental protection—the Neolution®Air Loop respirator combines FFP3 filter performance with the requirements for Type IIR medical face masks, thereby protecting the wearer from the most dangerous aerosols while also preventing the environment from being contaminated by exhaled air.

The Neolution®Air Loop is made of high-quality polypropylene nonwoven fabric with natural latex-free ear loops and a flexible nose clip. The high-tech FFP3-class filter material achieves an actual particle penetration rate that is many times lower than the legal requirement of a maximum of 1% and a bacterial filtration efficiency of over 98%. It thus protects against the most dangerous aerosols as well as bacteria and pathogens. Since the mask is designed without an exhalation valve, exhaled air is completely expelled through the filter material—a decisive advantage wherever not only the wearer but also patients, products, or the sterile environment must be protected. The three-part design follows the natural movements of the jaw and ensures a consistently tight fit without the need for readjustment; the wide ear loops do not dig in even after hours of wear. As a Class I medical device and PPE Category III certified with Helmke Drum Test Category I, the 257 meets the strictest requirements for both cleanroom and medical use.

Examples of use

Thanks to its beak-shaped design, the respirator mask offers a comfortably large breathing volume. Textile head straps ensure a secure fit without tugging at the hair, whilst the very low breathing resistance makes it extremely comfortable to wear.

A comfortable respiratory protection mask with a space-saving design: with its distinctive ‘duckbill’ shape, the ubiQ²® offers exceptional respiratory protection whilst maintaining a breathing resistance that is many times lower than the standard requirements, thereby combining safety, comfort and ease of use in a single mask.

Die ubiQ²® besteht aus hochwertigem Polypropylen-Vliesstoff mit einem Filtermedium aus Polypropylen-Mikrofaser, einem flexiblen, mit Plastik ummantelten Nasenbügel und einem textilen Kopfband ohne Naturlatex. Der Hochleistungsfilter erreicht einen tatsächlichen Partikeldurchlass, der deutlich unter den zulässigen Höchstwerten liegt und bietet damit ein Höchstmaß an Sicherheit. Bei einem Atemwiderstand weit unterhalb des zulässigen Grenzwerts ermöglicht die Maske selbst bei intensiver körperlicher Arbeit oder langen Tragezeiten ein außergewöhnlich freies, ermüdungsarmes Atmen. Die charakteristische "Duckbill"-Form sorgt für eine einfache Handhabung beim Aufsetzen und ermöglicht zugleich eine besonders platzsparende Lagerung und praktische Mitnahme, etwa in Taschen oder Erste-Hilfe-Ausrüstungen. Über den modellierbaren Nasenbügel wird die Maske um den Nasenrücken herum abgedichtet. Wissenschaftlich belegte Hautverträglichkeit nach EN ISO 10993 und bestandener Dolomitstaub-Einspeichertest runden das herausragende Leistungsprofil dieser Made-in-Germany-Maske ab.

Examples of use:

• Healthcare facilities requiring FFP2 protection and Type IIR certification

• Cleanroom and pharmaceutical applications

• Industry and the skilled trades where there are high levels of particulate matter or aerosols

• Mobile operations and first-aid equipment thanks to space-saving storage

Thanks to its duckbill-shaped design, the respirator mask offers a comfortably large breathing volume. Textile head straps ensure a secure fit without tugging at the hair, whilst the very low breathing resistance makes it extremely comfortable to wear.

A comfortable respiratory protection mask with a space-saving design: with its distinctive ‘duckbill’ shape, the ubiQ²® offers exceptional respiratory protection whilst maintaining a breathing resistance that is many times lower than the standard requirements, thereby combining safety, comfort and ease of use in a single mask.

The ubiQ²® is made from high-quality polypropylene non-woven fabric with a polypropylene microfibre filter medium, a flexible, plastic-coated nose clip and a textile headband free from natural latex. The high-performance filter achieves an actual particle penetration rate that is significantly below the maximum permissible limits, thereby offering the highest level of safety. With breathing resistance well below the permissible limit, the mask allows for exceptionally easy, fatigue-free breathing, even during strenuous physical work or when worn for long periods. The distinctive ‘duckbill’ shape makes it easy to put on, whilst also allowing for particularly space-saving storage and convenient transport, for example in bags or first-aid kits. The mouldable nose clip ensures the mask fits snugly around the bridge of the nose. Scientifically proven skin compatibility in accordance with EN ISO 10993 and a successful dolomite dust retention test round off the outstanding performance profile of this mask, made in Germany

Examples of use:

• Medizinische Einrichtungen mit Anforderung an FFP2-Schutz und Typ IIR-Zertifizierung

• Cleanroom and pharmaceutical applications

• Industry and the skilled trades where there are high levels of particulate matter or aerosols

• Mobile operations and first-aid equipment thanks to space-saving storage

Thanks to its duckbill-shaped design, the respirator mask offers a comfortably large breathing volume. Textile head straps ensure a secure fit without tugging at the hair, whilst the very low breathing resistance makes it extremely comfortable to wear.

Maximum FFP3 filtration performance in a space-saving design: with its distinctive ‘duckbill’ shape, the ubiQ³® offers exceptional respiratory protection with a breathing resistance that is many times lower than the standard requirements, thereby combining safety, comfort and ease of use in a single mask.

The ubiQ³® is made from high-quality polypropylene non-woven fabric with a polypropylene microfibre filter medium, a flexible, plastic-coated nose clip and a textile headband free from natural latex. The high-performance filter achieves an actual particle penetration rate that is well below the maximum permissible limits, thereby offering the highest level of safety. With a breathing resistance of barely one-sixth of the permissible limit, the mask allows for exceptionally easy, fatigue-free breathing, even during intense physical work or when worn for long periods. The distinctive ‘duckbill’ shape makes it easy to put on, whilst also allowing for particularly space-saving storage and convenient transport, for example in bags or first-aid kits. The mouldable nose clip ensures the mask fits snugly around the bridge of the nose. Scientifically proven skin compatibility in accordance with EN ISO 10993 and a successful dolomite dust retention test round off the outstanding performance profile of this mask, made in Germany.

Examples of use:

• Healthcare facilities requiring FFP3 protection and Type IIR certification

• Cleanroom and pharmaceutical applications

• Industry and the skilled trades where there are high levels of particulate matter or aerosols

• Mobile operations and first-aid equipment thanks to space-saving storage

FFP2 NR D respirator mask with high filtration efficiency, designed to protect against aerosols and airborne particles. Features an exhalation valve for easy breathing and enhanced comfort. Has passed voluntary dolomite dust testing.

The ‘Classic’ range of respiratory masks is characterised by a pre-shaped mask body and a traditional fit for ease of use. The mask is free from natural latex and has passed the voluntary dolomite dust test for disposable masks, ensuring maximum breathing comfort even in environments with high levels of particulate matter.

The “Classic” range of respirator masks offers reliable protection against dust, aerosols and non-volatile liquid particles. The respirator mask is classified as Category III PPE and meets the requirements of protection class FFP2 NR D in accordance with EN 149:2001+A1:2009. The mask is made of polypropylene non-woven fabric on both the outside and inside and uses a filter medium made of polypropylene microfibres. The additional exhalation valve prevents heat build-up and moisture inside the mask, thereby significantly increasing wearing comfort. Thanks to its shell shape, the respirator can be securely fitted in just a few simple steps. Equipped with a high-performance filter, the respirators in the ‘Classic’ series ensure high filtration efficiency with low breathing resistance, thereby offering maximum safety and comfort. The nose clip is padded so it does not press against the nose and can be easily adjusted to fit the individual shape of the nose. The dolomite dust test, which is optional for disposable masks, guarantees a high level of comfort, even when worn for long periods in environments with high particle concentrations. The mask protects against airborne pathogens, aerosols and non-volatile liquid particles up to 10 times the respective occupational exposure limit.

Examples of use:

Tested in accordance with all applicable European medical standards, the product offers a high level of comfort thanks to its low breathing resistance and skin-friendly material—even during prolonged use.

Reliable patient protection in everyday clinical practice – the Model D Loop is a Type IIR medical face mask that combines maximum comfort and proven protection for healthcare professionals thanks to its anatomical shape, skin-friendly material, and soft ear loops.

The Model D Loop features a three-layer construction with polypropylene spunbond fabric on the outside and inside, as well as a polypropylene microfiber filter medium, complemented by soft polypropylene-elastane ear loops and an easily moldable HDPE nose clip. The anatomically shaped mask adapts individually to any face shape thanks to the flexible nose clip and fits securely and tightly without slipping. The inner and outer layers are physiologically safe, phthalate-free, odorless, and latex-free—for maximum comfort even for people with sensitive skin or allergies. With a bacterial filtration efficiency of over 99% and a splash resistance of 16.0 kPa, the mask reliably meets Type IIR requirements, thereby protecting both medical staff and patients from droplets and splashes. The practical dispenser box containing 50 masks allows for hygienic dispensing directly at the workplace—quickly, cleanly, and without interrupting workflow.

Examples of use

Medical Type IIR mask with integrated face shield for enhanced protection against droplets and liquid splashes. The anti-fog face shield with side protection ensures clear vision in demanding medical settings.

The MediClassic Splash REF 209G combines a medical face mask with an integrated face shield, offering enhanced protection against droplets and splashes. The anti-fog face shield with side protection ensures clear vision and provides increased protection in demanding medical settings.

The medical face mask is classified as a Class I medical device and meets the requirements of EN 14683:2019 as a Type IIR mask. The anatomically shaped, 3-layer construction with an easily moldable nose clip allows for individual adjustment to the shape of the face and ensures a secure fit. The inner and outer layers consist of physiologically safe, plasticizer-free polypropylene nonwoven fabric, while the filter medium is made of polypropylene microfiber. The filter system, ultrasonically welded, achieves a bacterial filtration efficiency (BFE) of 99.9%. The integrated, non-reflective eye shield is designed to be fog-free and features additional side flaps that protect against liquid splashes without distorting vision. With a pressure difference of only 33.3 Pa/cm², the mask offers high breathing comfort even during prolonged wear. The splash resistance of 16 kPa meets the requirements for liquid-resistant Type IIR masks. At ≤ 5 CFU/g, the microbiological purity is well below the permissible limit of ≤ 30 CFU/g. All materials used are free of irritants, odorless, and comply with the requirements for biocompatibility according to ISO 10993.

Examples of use

Medical Type IIR mask with integrated face shield for enhanced protection against droplets and splashes. The anti-fog face shield with side protection ensures clear vision in challenging treatment situations.

The MediClassic Splash REF 208G combines a medical face mask with an integrated face shield, offering enhanced protection against droplets and splashes. The anti-fog face shield with side protection ensures clear vision and supports safe working practices even in challenging treatment situations.

The medical face mask is classified as a Class I medical device and meets the requirements of EN 14683:2019 as a Type IIR mask. The anatomically shaped, 3-layer construction with an easily moldable nose clip allows for individual adjustment to the shape of the face and ensures a secure fit. The inner and outer layers consist of physiologically safe, plasticizer-free polypropylene nonwoven fabric, while the filter medium is made of polypropylene microfiber. The ultrasonically welded filter system achieves a bacterial filtration efficiency (BFE) of 99.9%. The integrated, non-reflective eye shield is designed to be fog-free and features additional side flaps that provide extended protection against liquid splashes without distorting vision. The latex-free ear loops made of polyester and elastane ensure a comfortable fit and high wearing comfort. With a pressure difference of only 33.3 Pa/cm², the mask allows for comfortable breathing even during extended wear. The splash resistance of 16 kPa meets the requirements for liquid-resistant Type IIR masks. At ≤ 5 CFU/g, the microbiological purity is well below the required limit of ≤ 30 CFU/g. All materials used are free of irritants, comply with the biological compatibility requirements of ISO 10993, and are suitable for medical applications.

Examples of use

Tested in accordance with all applicable European medical standards, this product offers a high level of comfort thanks to its low breathing resistance and skin-friendly material. The ear loops are gentle on the ears—especially during prolonged use

The MediClassic Excel REF 207G was designed for daily use in medical facilities and combines high filtration performance with comfortable wear. The Type IIR mask offers reliable protection against droplets and splashes and supports safe working practices in everyday medical settings.

The medical face mask is classified as a Class I medical device and meets the requirements of EN 14683:2019 as a Type IIR mask. The anatomically shaped design, featuring an easily adjustable nose clip, allows for a custom fit to the shape of the face and ensures a secure seal. The inner and outer layers are made of skin-friendly, physiologically safe, and plasticizer-free polypropylene nonwoven fabric. The filter system is based on a meltblown polypropylene microfiber nonwoven fabric and achieves a bacterial filtration efficiency (BFE) of 99.9%. The mask is ultrasonically welded and offers a robust construction for daily use. With a pressure difference of only 33.3 Pa/cm², it provides comfortable breathing even during extended wear. The splash resistance of 16 kPa meets the requirements for liquid-resistant medical face masks. The microbiological purity of ≤ 5 CFU/g is well below the limit of ≤ 30 CFU/g. All materials used are free of irritants, odorless, and suitable for medical applications.

Examples of use

Medical Type IIR mask with high filtration efficiency and a liquid-resistant protective barrier for everyday medical use. Soft ear loops and low breathing resistance ensure high comfort during extended wear.

The MediClassic Loop REF 206G combines reliable medical protection with exceptional comfort. The soft ear loops and high breathability ensure a comfortable fit, even during extended periods of wear in everyday medical practice.

The medical face mask is classified as a Class I medical device and meets the requirements of EN 14683:2019+AC:2019 as a Type IIR mask. The anatomically shaped design, featuring an easily moldable nose clip, allows for individual adjustment to the shape of the face and ensures a secure fit. The inner and outer layers are made of skin-friendly, hypoallergenic, and phthalate-free polypropylene nonwoven fabric. The filter system is based on a meltblown polypropylene microfiber nonwoven fabric and achieves a bacterial filtration efficiency (BFE) of 99.9%. The mask is ultrasonically welded and features elastic ear loops made of soft polyester and elastane. With a pressure difference of only 33.3 Pa/cm², it offers high breathing comfort even during extended wear. The splash resistance of 16 kPa meets the requirements for Type IIR liquid-resistant medical face masks. The microbiological purity of ≤ 5 CFU/g is well below the permissible limit of ≤ 30 CFU/g. All materials used are free of irritants, odorless, and suitable for medical applications.

Examples of use

Medical Type IIR mask with high filtration efficiency and a liquid-resistant protective barrier for professional use. The black version combines reliable protection with a modern look and high comfort.

The Medical Face Mask REF 204 combines reliable medical protection with a modern black design. This Type IIR mask offers high filtration performance and is comfortable to wear, making it suitable for professional use in medical and hygiene-critical settings.

The medical face mask is classified as a Class I medical device and meets the requirements of EN 14683:2019 as a Type IIR mask. The anatomically shaped design, featuring an easily adjustable nose clip, allows for a custom fit to the shape of the face and ensures a secure seal. The inner and outer layers are made of skin-friendly, hypoallergenic, and phthalate-free polypropylene. The polypropylene filter system achieves a bacterial filtration efficiency (BFE) of 99.9% and provides a reliable barrier against bacteria. The mask is ultrasonically welded and features elastic ear loops made of soft polyester and spandex. With a pressure difference of 36.6 Pa/cm², it offers comfortable breathing even during extended wear. The splash resistance of 16 kPa meets the requirements for liquid-resistant Type IIR masks. Dermatological testing revealed no adverse reactions. All materials used are free of irritants, odorless, and suitable for medical applications.

Examples of use

Medical Type IIR mask with an exceptionally soft inner lining for high comfort, even during extended wear. The low breathing resistance and high filtration efficiency support comfortable and safe work in everyday medical practice.

The MediPro Loop REF 2108 was designed for users who want to combine maximum comfort with reliable medical protection. The specially developed inner fleece reduces the adhesion of fibers to the skin and facial hair, ensuring a particularly comfortable fit even during extended wear.

The medical face mask is classified as a Class I medical device and meets the requirements of EN 14683:2019 as a Type IIR mask. The anatomically shaped design with an easily moldable nose clip allows for individual adjustment to the shape of the face and ensures a secure fit. The newly developed inner nonwoven fabric consists of particularly smooth, skin-friendly polypropylene and was designed to minimize protruding fiber ends. This reduces the adhesion of nonwoven fibers to the skin and facial hair. The polypropylene microfiber filter system achieves a bacterial filtration efficiency (BFE) of 99.9% and provides an effective barrier against bacteria. The entire mask is ultrasonically welded and complies with the HACCP concept. The soft, textile ear loops made of latex-free elastic band further enhance wearing comfort. With a pressure difference of only 24 Pa/cm², the MediPro Loop offers particularly low breathing resistance and thus very high breathing comfort. The splash resistance of 16.0 kPa meets the requirements for liquid-resistant Type IIR masks. The microbiological purity of ≤ 3 CFU/g is well below the permissible limit of ≤ 30 CFU/g. Dermatological testing revealed no contraindications.

Examples of use

Tested in accordance with all applicable European medical standards, the product offers a high level of comfort thanks to its low breathing resistance and skin-friendly material—even during prolonged use.

Reliable patient protection in everyday clinical practice – the Model D Loop is a Type IIR medical face mask that combines maximum comfort and proven protection for healthcare professionals thanks to its anatomical shape, skin-friendly material, and soft ear loops.

The Model D Loop features a three-layer construction with polypropylene spunbond fabric on the outside and inside, as well as a polypropylene microfiber filter medium, complemented by soft polypropylene-elastane ear loops and an easily moldable HDPE nose clip. The anatomically shaped mask adapts individually to any face shape thanks to the flexible nose clip and fits securely and tightly without slipping. The inner and outer layers are physiologically safe, phthalate-free, odorless, and latex-free—for maximum comfort even for people with sensitive skin or allergies. With a bacterial filtration efficiency of over 99% and a splash resistance of 16.0 kPa, the mask reliably meets Type IIR requirements, thereby protecting both medical staff and patients from droplets and splashes. The practical dispenser box containing 50 masks allows for hygienic dispensing directly at the workplace—quickly, cleanly, and without interrupting workflow.

Examples of use:

Medical surgical mask with high bacterial filtration efficiency for daily use in hospitals, medical practices, and healthcare settings. Soft ear loops and low breathing resistance ensure high comfort during extended periods of wear.

The REF 202 surgical mask provides reliable basic medical protection for daily use in hospitals, medical practices, and care facilities. The combination of high filtration efficiency, low breathing resistance, and comfortable ear loops ensures a comfortable fit even during extended periods of wear.

The medical face mask is classified as a Class I medical device and meets the requirements of EN 14683:2019+AC:2019 as a Type II mask. The anatomically shaped design with an easily moldable nose clip allows for individual adjustment to the shape of the face and ensures a secure fit. The inner and outer layers are made of skin-friendly, hypoallergenic, and phthalate-free polypropylene nonwoven fabric. The polypropylene microfiber filter medium achieves a bacterial filtration efficiency (BFE) of 99.8% and provides a reliable barrier against bacteria. The mask is equipped with soft, latex-free ear loops made of polyester and polyurethane, ensuring comfortable wear. With a pressure difference of only 25 Pa/cm², it offers very low breathing resistance and supports comfortable breathing even during extended wear. The microbiological purity of ≤ 5.94 CFU/g is well below the permissible limit of ≤ 30 CFU/g. Dermatological testing revealed no contraindications. All materials used are free of irritants, meet the requirements for biocompatibility according to ISO 10993, and are suitable for medical applications.

Examples of use

Disposable hairnet, Ø 50 cm, made from soft polypropylene non-woven fabric for reliable hair coverage in hygiene-critical work areas. The compact clip-on design allows for space-saving storage and quick access during everyday work.

Disposable gowns made of soft polypropylene nonwoven fabric for hygiene-critical work environments in healthcare, nursing, and manufacturing. Knitted cuffs ensure a comfortable fit and make the gowns pleasant to wear during the workday.

The ComfortCoat REF 415 offers a comfortable and hygienic solution for daily use in medical and production-related work environments. The soft non-woven fabric and knitted cuffs ensure a comfortable fit and allow for comfortable work even over extended periods.

The disposable gown is made of pure polypropylene nonwoven fabric and is classified as both a Class I medical device and Category I PPE. The soft material offers high comfort and is suitable for a wide range of hygiene-critical applications. The opening at the back allows for easy donning and doffing, while two tie belts ensure a custom fit and secure hold. Knitted polyester cuffs provide a comfortable fit at the wrist and improve the fit while working. With a length of 125 cm and a width of 145 cm, the gown offers generous coverage of clothing. The design complies with the HACCP concept and supports adherence to high hygiene standards. Furthermore, no adverse reactions were observed during dermatological compatibility testing. The dark green color allows for easy visual identification within workplace hygiene protocols.

Examples of use