Protective clothing for inpatient and outpatient care

Sterile surgical gown with a reinforced protective barrier for surgical procedures involving high fluid volume. The multi-layer material construction offers high fluid resistance and reliable protection in the sterile operating room environment.

The EcoCoat Splash S was developed for surgical procedures involving high fluid exposure and offers a reinforced protective barrier for demanding surgical applications. The multi-layer material construction combines high fluid resistance with reliable bacterial protection and supports safe workflows in a sterile environment.

The sterile surgical gown is classified as a Class I medical device and is manufactured in accordance with EN ISO 13485:2016. The reinforced 5-layer construction on the front and sleeves provides enhanced protection against the penetration of liquids and bacteria. The low-lint, abrasion-resistant gown is ultrasonically welded. The medical-grade folding design allows for user-friendly removal and facilitates sterile donning. The opening at the back, Velcro fastener on the collar, two tie belts, and knitted cuffs ensure a secure and comfortable fit. The gown is free of natural latex and intended for single-use. Sterilization is performed using ethylene oxide. The gown meets the requirements for surgical gowns in the “High” performance class according to the EN 13795 standard.

Examples of use

Protective coveralls that provide comprehensive protection against viruses, bacteria, and contaminated liquids for applications with heightened infection control requirements. The all-around protective design ensures reliable coverage of the front and back.

The IsoCoat REF 437 was developed for demanding work environments where reliable protection against biological hazards is required. Its all-around protective design provides a high level of barrier protection against infectious agents and supports safe work procedures in sensitive medical, healthcare, and industrial settings.

The protective gown is made of PE-coated PP nonwoven fabric and is classified as both Category III PPE and a Class I medical device. Certification to EN 14126 confirms protection against blood, viruses, bacteria, contaminated particles, and liquid aerosols. The gown provides full protection on the front and back, making it suitable for applications with increased infection control requirements. The fastening straps at the neck, the tie belt at the waist, and the latex-free elastic knit cuffs ensure a secure fit and reliable coverage, even when worn with protective gloves. In the Helmke Drum Test according to IEST-RP-CC003.4, the material achieved Category II and is recommended for cleanrooms in accordance with DIN EN ISO 14644-1, ISO Classes 6 through 9. The high material durability is demonstrated by a flexural tear resistance of over 100,000 cycles, a tear strength of over 30 N, and a puncture resistance of over 5 N. In the area of infection control, resistance to the penetration of contaminated liquids containing bacteriophages of 20 kPa (EN Class 6) and resistance to mechanically transmitted infectious agents of over 75 minutes (EN Class 6) were demonstrated. The lab coat has not been tested for chemical resistance and is not suitable for handling o-xylene, butan-1-ol, or other organic chemicals.

Examples of use

The liquid-repellent protective gown, which is 160 cm long, is closed at the front and is securely fastened with ties at the neck and waist. Knitted cuffs enhance comfort. The material has been tested for resistance to infectious agents and cytostatic drugs.

The liquid-repellent protective gown, which is 130 cm long, is closed at the front and is securely fastened with ties at the neck and waist. Knitted cuffs enhance comfort. The material has been tested for resistance to infectious agents and cytostatic drugs.

Patient gowns made of opaque polypropylene nonwoven fabric for examinations, treatments, and stays in medical facilities. The front opening and side ties ensure a high level of comfort and a custom fit.

The REF 418 kimono was designed specifically for patients and offers a comfortable solution for examinations, treatments, and stays in medical facilities. The soft, opaque non-woven fabric ensures a comfortable fit and helps maintain privacy.

The patient gown is made of polypropylene nonwoven fabric and is classified as both a Class I medical device and Category I PPE. The opaque material ensures a discreet and comfortable experience during medical examinations and treatments. The front opening allows for easy donning and doffing, while two side ties ensure a custom fit and secure hold. The short sleeves promote freedom of movement and contribute to high comfort. Furthermore, no adverse reactions were observed during dermatological compatibility testing. The kimono is available in lengths of 120 cm (size L) and 140 cm (size XL) and can therefore be adapted to different body sizes. The dark blue color ensures a professional appearance in medical facilities.

Examples of use

Disposable gowns made of soft polypropylene nonwoven fabric for hygiene-critical work areas in healthcare, nursing, and manufacturing. Knitted cuffs and a tie belt ensure a comfortable fit and high wearability.

The EcoCoat pro REF 411 offers high comfort and reliable hygiene support for daily use in medical and production-related work environments. The knitted cuffs and generous size options ensure a secure fit and comfortable wear, even during extended periods of use.

The disposable lab coat is made of pure polypropylene nonwoven fabric and is classified as both a Class I medical device and Category I PPE. The soft material ensures comfortable wear in hygiene-critical environments. The opening at the back makes it easy to put on and take off, while two tie belts allow for a custom fit and secure hold. Knitted polyester cuffs provide a comfortable fit at the wrist and ensure a secure fit while working. The design complies with the HACCP concept and helps maintain high hygiene standards. Furthermore, no adverse reactions were observed during dermatological compatibility testing. With available lengths of 115 cm (size M), 136 cm (size L), and 150 cm (size XL), the EcoCoat pro is suitable for a variety of body sizes and application requirements. The green color allows for easy integration into existing hygiene protocols.

Examples of use

This lightweight disposable gown fastens securely with ties and is very comfortable to wear. Elastic bands at the sleeves ensure that they stay securely in place.

The EcoCoat REF 410 offers a comfortable and hygienic solution for daily use in medical and production-related work environments. The soft non-woven fabric and flexible fit ensure a comfortable fit and allow for comfortable work over extended periods.

The disposable gown is made of pure polypropylene nonwoven fabric and is classified as both a Class I medical device and Category I PPE. The soft material ensures high comfort and is suitable for a wide range of hygiene-critical applications. The opening at the back allows for easy donning and doffing, while two tie belts support individual adjustment and a secure fit. The sleeves are equipped with an elastic band edged with an overlock seam, which ensures a reliable seal at the wrist. The gown complies with the HACCP concept and supports adherence to high hygiene standards. Furthermore, no adverse reactions were observed during dermatological compatibility testing. With two available lengths—115 cm (size M) and 136 cm (size L)—the EcoCoat can be adapted to different requirements. Its availability in green, blue, and white also allows for easy integration into existing hygiene protocols.

Examples of use

PE examination gown with a barrier that is impervious to viruses, blood, and bodily fluids. The integrated Quick-Off system makes it easy to safely remove the gown after use.

The REF 622B PE lab coat is designed for applications that require reliable protection against liquids, blood, and viruses. Its well-thought-out design, featuring a Quick-Off system, facilitates safe removal and helps minimize contact with potentially contaminated surfaces.

The examination gown is made of polyethylene and is designed to be virus-, blood-, and fluid-resistant. As a Class I medical device and Category I PPE, it is suitable for use in medical and hygiene-critical areas. Long sleeves with integrated thumb holes ensure a secure fit and prevent the gown from slipping during work. The neck loop and two side ties allow for easy adjustment to the wearer. The integrated Quick-Off system enables the gown to be torn off in a controlled manner after use, thereby supporting low-contamination removal. The material has been tested for penetration by blood and viruses in accordance with DIN EN 14126. In tests conducted in accordance with ISO 16603, the material proved impermeable to synthetic blood at test pressures ranging from 10.9 to 11.2 kPa. Furthermore, in tests conducted in accordance with ISO 16604 at 0 kPa and 10 kPa, no penetration of bacteriophages was detected.

Examples of use

PE examination gown with a barrier that is impervious to viruses, blood, and bodily fluids. The integrated Quick-Off system makes it easy to safely remove the gown after use.

The REF 621B PE lab coat is designed for applications that require reliable protection against liquids, blood, and viruses. Its well-thought-out design, featuring a Quick-Off system, facilitates safe removal and helps minimize contact with potentially contaminated surfaces.

The examination gown is made of polyethylene and is designed to be virus-, blood-, and liquid-resistant. As a Class I medical device and Category I PPE, it is suitable for use in medical and hygiene-critical areas. Long sleeves with integrated thumb holes ensure a secure fit and prevent the gown from slipping during work. The neck loop and two side ties allow for easy adjustment to the wearer. The integrated Quick-Off system enables the gown to be torn off in a controlled manner after use, thereby supporting low-contamination removal. The material has been tested for blood and virus penetration in accordance with DIN EN 14126. In tests conducted in accordance with ISO 16603, the material proved impermeable to synthetic blood at test pressures ranging from 10.9 to 11.2 kPa. Furthermore, in tests conducted in accordance with ISO 16604 at 0 kPa and 10 kPa, no penetration of bacteriophages was detected.

Examples of use

For extra protection against liquids, the outfit can be complemented with a bib apron. The composite material, made of durable non-woven fabric and plastic film, reliably covers the front of the body down to the knees.

The REF 615W bib apron promotes hygienic work practices and reliably protects clothing from soiling in sensitive work areas. The soft, coated nonwoven fabric ensures a pleasant fit and allows for comfortable use over extended periods of time.

The bib apron is made of antistatic-treated polypropylene nonwoven fabric with an LDPE coating. This combination of materials combines comfort with additional protective properties for hygiene-critical work environments. The integrated neck loop allows the apron to be put on quickly, while the side ties ensure a secure and customizable fit. Measuring 105 x 70 cm, the apron provides extensive coverage of the upper body and protects the clothing underneath from soiling. The antistatic finish supports use in controlled work areas. The design complies with the HACCP concept and helps ensure adherence to high hygiene standards. Thanks to the soft material, comfort is maintained even during prolonged use.

Examples of use

Patient shorts made of soft polypropylene nonwoven fabric for comfortable and discreet examinations. The closable Velcro flap allows for controlled access to the examination area and helps maintain patient privacy.

The OP-Shorts plus REF 713B were designed for examinations where patient comfort, privacy, and controlled access to the examination area are particularly important. The integrated Velcro flap allows the examination slit to be opened as needed and helps ensure a comfortable and dignified examination process.

The OP-Shorts Plus are classified as Category I PPE and are made of soft, skin-friendly polypropylene nonwoven fabric. The mid-length legs provide comfortable coverage while allowing for a high degree of freedom of movement. An elastic waistband made of latex-free synthetic elastomer ensures a secure and comfortable fit for various body types. Unlike the standard version, the Surgical Shorts Plus feature an examination slit with a Velcro closure that can be opened as needed and then closed again. This helps maintain patient privacy during pre- and post-examination procedures. The generous cut is designed for ambidextrous use and facilitates handling in everyday medical practice. The shorts comply with the HACCP concept and are suitable for hygiene-critical examination areas. Dermatological testing revealed no adverse reactions. The product is available in sizes One Size and XXL. The one-size-fits-all version measures 60 cm in length, 70 cm in width, and has a slit length of 22.5 cm. The XXL size measures 67 cm in length, 80 cm in width, and has a slit length of 25.5 cm.

Examples of use

Guaranteed to be slip-resistant on smooth surfaces such as PVC flooring or tiles, and made from durable, liquid-repellent coated material. Particle release has been tested in accordance with IEST-RP-CC003.5.

The DryGrip REF 902 was designed for work environments where a secure footing and reliable protection against moisture are particularly important. Its sturdy construction, featuring a waterproof and slip-resistant outer layer, ensures safe movement even on challenging surfaces.

The DryGrip is made of a spunbond polypropylene fabric with a 0.13 mm thick PE coating on the outside. This coating makes the overshoe completely waterproof, highly durable, and slip-resistant. This makes the product ideal for work environments where moisture or slippery floors pose a challenge. The flexible foot opening is ultrasonically welded and conforms snugly to the foot, ensuring a high level of comfort. The integrated elastic band made of natural rubber ensures a secure fit and makes it easy to put on and take off quickly. Thanks to its one-size-fits-all design, the DryGrip adapts to different foot shapes and can be used flexibly. The combination of a robust material construction and comfortable wear makes it a practical solution for hygiene-critical and production-related work areas.

Examples of use

These low-particle film overshoes are liquid-tight and provide reliable protection in sensitive areas. Particle emission has been tested in accordance with IEST-RP-CC003.5.

The REF 941B PE shoe covers reliably protect footwear from dirt and help ensure compliance with strict hygiene standards in sensitive work environments. Their liquid-impermeable design helps reduce the introduction of contaminants and keep controlled work areas clean.

The shoe covers are made of 45-micron-thick polyethylene and form a liquid-impermeable barrier over existing footwear. The material provides reliable protection against contamination and supports hygienic work processes in production and cleanroom areas. A heat-sealed elastic band ensures a secure fit and makes them quick and easy to put on and take off. With a length of 42 cm, the shoe covers provide ample coverage for various shoe styles. The design complies with the HACCP concept and is suitable for hygiene-critical applications. In the Helmke Drum Test in accordance with IEST-RP-CC003.4, the shoe covers achieved Category I. For use in cleanrooms, suitability for DIN EN ISO 14644-1 cleanrooms of ISO classes 5 to 9 is recommended. Furthermore, no adverse reactions were observed during the dermatological compatibility test. The blue color ensures good visibility and supports compliance with workplace hygiene protocols.

Examples of use

These low-particle film overshoes are liquid-tight and provide reliable protection in sensitive areas. Particle emission has been tested in accordance with IEST-RP-CC003.5.

The REF 941B PE shoe covers reliably protect footwear from dirt and help ensure compliance with strict hygiene standards in sensitive work environments. Their liquid-impermeable design helps reduce the introduction of contaminants and keep controlled work areas clean.

The shoe covers are made of 45-micron-thick polyethylene and form a liquid-impermeable barrier over existing footwear. The material provides reliable protection against contamination and supports hygienic work processes in production and cleanroom areas. A heat-sealed elastic band ensures a secure fit and makes them quick and easy to put on and take off. With a length of 42 cm, the shoe covers provide ample coverage for various shoe styles. The design complies with the HACCP concept and is suitable for hygiene-critical applications. In the Helmke Drum Test in accordance with IEST-RP-CC003.4, the shoe covers achieved Category I. For use in cleanrooms, suitability for DIN EN ISO 14644-1 cleanrooms of ISO Classes 5 to 9 is recommended. Furthermore, no adverse reactions were observed during the dermatological compatibility test. The blue color ensures good visibility and supports compliance with workplace hygiene protocols.

Example of use

Overshoes made of durable polypropylene nonwoven fabric to protect against dirt in hygiene-critical work areas. The rubberized sole provides a secure footing on slippery surfaces.

The REF 931 PP shoe covers reliably protect footwear from dirt and help maintain hygienic work practices in sensitive work areas. The rubberized sole provides extra traction, making the product particularly suitable for work environments where a secure footing is essential.

The shoe covers are made of durable non-woven fabric composed of pure polypropylene and provide reliable protection for footwear. The top opening is edged with an overlock seam and features a high-quality, latex-free polyurethane elastic band that ensures a secure fit. The rubberized sole enhances slip resistance and can reduce the risk of slipping on smooth floors. With a length of 44 cm, the shoe covers are suitable for various shoe styles and can be quickly put on and taken off. The design complies with the HACCP concept and supports hygienic work processes in controlled areas. Thanks to the use of a latex-free elastic band, the product is also suitable for environments where latex should be avoided. Furthermore, no intolerance reactions were observed during dermatological compatibility testing. The shoe covers are available in blue and white.

Examples of use

Overshoes made of antistatic-treated polypropylene nonwoven fabric with a liquid-repellent PE coating for controlled work environments. Heat-sealed seams ensure reliable particle control and high hygiene standards.

The REF 926W PP overshoes are designed for use in controlled and hygiene-critical areas where both particle control and protection against moisture are required. The combination of durable non-woven fabric, a liquid-repellent PE coating, and heat-sealed seams ensures a high level of process reliability in sensitive work environments.

The shoe covers are made of antistatic-treated polypropylene nonwoven fabric and feature a liquid-repellent polyethylene coating on the lower section. This combination of materials protects footwear from dirt and moisture while promoting hygienic work practices. All seams are securely welded using an ultrasonic process, resulting in a robust construction without sewn joints. The integrated elastic band made of natural rubber ensures a secure fit and makes it easy to put on and take off quickly. In the Helmke Drum Test according to IEST-RP-CC003.4, the shoe covers achieved Category II. For use in cleanrooms, suitability according to DIN EN ISO 14644-1 for ISO Classes 6 to 9 is recommended. The antistatic treatment supports use in controlled production environments. With a length of 41 cm, the shoe covers provide reliable coverage for various shoe models.

Examples of use

Overshoes made of antistatic-treated polypropylene nonwoven fabric to protect against contamination in hygiene-critical work areas. The elastic waistband ensures a secure fit and makes them easy to put on and take off quickly.

The REF 920W PP shoe covers promote hygienic work practices and reliably protect footwear from dirt. The sturdy non-woven fabric is comfortable to wear and is suitable for use in sensitive work environments with high hygiene standards.

The shoe covers are made of pure, antistatic-treated polypropylene nonwoven fabric. The sturdy material ensures reliable coverage of footwear and supports clean work processes in hygiene-critical areas. The antistatic treatment can help reduce electrostatic charges and makes the product suitable for relevant work environments. An all-around elastic band made of natural rubber ensures a secure fit and makes it easy to put on and take off quickly. With a length of 44 cm, the shoe covers provide ample coverage for various shoe styles. The design complies with the HACCP concept and supports adherence to workplace hygiene standards. Furthermore, no adverse reactions were observed during dermatological compatibility testing. The white color facilitates quick visual inspection and maintains a clean appearance in the work area.

Examples of use