Application

Sterile surgical gown with a reinforced protective barrier for surgical procedures involving high fluid volume. The multi-layer material construction offers high fluid resistance and reliable protection in the sterile operating room environment.

The EcoCoat Splash S was developed for surgical procedures involving high fluid exposure and offers a reinforced protective barrier for demanding surgical applications. The multi-layer material construction combines high fluid resistance with reliable bacterial protection and supports safe workflows in a sterile environment.

The sterile surgical gown is classified as a Class I medical device and is manufactured in accordance with EN ISO 13485:2016. The reinforced 5-layer construction on the front and sleeves provides enhanced protection against the penetration of liquids and bacteria. The low-lint, abrasion-resistant gown is ultrasonically welded. The medical-grade folding design allows for user-friendly removal and facilitates sterile donning. The opening at the back, Velcro fastener on the collar, two tie belts, and knitted cuffs ensure a secure and comfortable fit. The gown is free of natural latex and intended for single-use. Sterilization is performed using ethylene oxide. The gown meets the requirements for surgical gowns in the “High” performance class according to the EN 13795 standard.

Examples of use

Protective coveralls that provide comprehensive protection against viruses, bacteria, and contaminated liquids for applications with heightened infection control requirements. The all-around protective design ensures reliable coverage of the front and back.

The IsoCoat REF 437 was developed for demanding work environments where reliable protection against biological hazards is required. Its all-around protective design provides a high level of barrier protection against infectious agents and supports safe work procedures in sensitive medical, healthcare, and industrial settings.

The protective gown is made of PE-coated PP nonwoven fabric and is classified as both Category III PPE and a Class I medical device. Certification to EN 14126 confirms protection against blood, viruses, bacteria, contaminated particles, and liquid aerosols. The gown provides full protection on the front and back, making it suitable for applications with increased infection control requirements. The fastening straps at the neck, the tie belt at the waist, and the latex-free elastic knit cuffs ensure a secure fit and reliable coverage, even when worn with protective gloves. In the Helmke Drum Test according to IEST-RP-CC003.4, the material achieved Category II and is recommended for cleanrooms in accordance with DIN EN ISO 14644-1, ISO Classes 6 through 9. The high material durability is demonstrated by a flexural tear resistance of over 100,000 cycles, a tear strength of over 30 N, and a puncture resistance of over 5 N. In the area of infection control, resistance to the penetration of contaminated liquids containing bacteriophages of 20 kPa (EN Class 6) and resistance to mechanically transmitted infectious agents of over 75 minutes (EN Class 6) were demonstrated. The lab coat has not been tested for chemical resistance and is not suitable for handling o-xylene, butan-1-ol, or other organic chemicals.

Examples of use

The liquid-repellent protective gown, which is 160 cm long, is closed at the front and is securely fastened with ties at the neck and waist. Knitted cuffs enhance comfort. The material has been tested for resistance to infectious agents and cytostatic drugs.

The liquid-repellent protective gown, which is 130 cm long, is closed at the front and is securely fastened with ties at the neck and waist. Knitted cuffs enhance comfort. The material has been tested for resistance to infectious agents and cytostatic drugs.

Patient gowns made of opaque polypropylene nonwoven fabric for examinations, treatments, and stays in medical facilities. The front opening and side ties ensure a high level of comfort and a custom fit.

The REF 418 kimono was designed specifically for patients and offers a comfortable solution for examinations, treatments, and stays in medical facilities. The soft, opaque non-woven fabric ensures a comfortable fit and helps maintain privacy.

The patient gown is made of polypropylene nonwoven fabric and is classified as both a Class I medical device and Category I PPE. The opaque material ensures a discreet and comfortable experience during medical examinations and treatments. The front opening allows for easy donning and doffing, while two side ties ensure a custom fit and secure hold. The short sleeves promote freedom of movement and contribute to high comfort. Furthermore, no adverse reactions were observed during dermatological compatibility testing. The kimono is available in lengths of 120 cm (size L) and 140 cm (size XL) and can therefore be adapted to different body sizes. The dark blue color ensures a professional appearance in medical facilities.

Examples of use

Disposable gowns made of soft polypropylene nonwoven fabric for hygiene-critical work areas in healthcare, nursing, and manufacturing. Knitted cuffs and a tie belt ensure a comfortable fit and high wearability.

The EcoCoat pro REF 411 offers high comfort and reliable hygiene support for daily use in medical and production-related work environments. The knitted cuffs and generous size options ensure a secure fit and comfortable wear, even during extended periods of use.

The disposable lab coat is made of pure polypropylene nonwoven fabric and is classified as both a Class I medical device and Category I PPE. The soft material ensures comfortable wear in hygiene-critical environments. The opening at the back makes it easy to put on and take off, while two tie belts allow for a custom fit and secure hold. Knitted polyester cuffs provide a comfortable fit at the wrist and ensure a secure fit while working. The design complies with the HACCP concept and helps maintain high hygiene standards. Furthermore, no adverse reactions were observed during dermatological compatibility testing. With available lengths of 115 cm (size M), 136 cm (size L), and 150 cm (size XL), the EcoCoat pro is suitable for a variety of body sizes and application requirements. The green color allows for easy integration into existing hygiene protocols.

Examples of use

This lightweight disposable gown fastens securely with ties and is very comfortable to wear. Elastic bands at the sleeves ensure that they stay securely in place.

The EcoCoat REF 410 offers a comfortable and hygienic solution for daily use in medical and production-related work environments. The soft non-woven fabric and flexible fit ensure a comfortable fit and allow for comfortable work over extended periods.

The disposable gown is made of pure polypropylene nonwoven fabric and is classified as both a Class I medical device and Category I PPE. The soft material ensures high comfort and is suitable for a wide range of hygiene-critical applications. The opening at the back allows for easy donning and doffing, while two tie belts support individual adjustment and a secure fit. The sleeves are equipped with an elastic band edged with an overlock seam, which ensures a reliable seal at the wrist. The gown complies with the HACCP concept and supports adherence to high hygiene standards. Furthermore, no adverse reactions were observed during dermatological compatibility testing. With two available lengths—115 cm (size M) and 136 cm (size L)—the EcoCoat can be adapted to different requirements. Its availability in green, blue, and white also allows for easy integration into existing hygiene protocols.

Examples of use

PE examination gown with a barrier that is impervious to viruses, blood, and bodily fluids. The integrated Quick-Off system makes it easy to safely remove the gown after use.

The REF 622B PE lab coat is designed for applications that require reliable protection against liquids, blood, and viruses. Its well-thought-out design, featuring a Quick-Off system, facilitates safe removal and helps minimize contact with potentially contaminated surfaces.

The examination gown is made of polyethylene and is designed to be virus-, blood-, and fluid-resistant. As a Class I medical device and Category I PPE, it is suitable for use in medical and hygiene-critical areas. Long sleeves with integrated thumb holes ensure a secure fit and prevent the gown from slipping during work. The neck loop and two side ties allow for easy adjustment to the wearer. The integrated Quick-Off system enables the gown to be torn off in a controlled manner after use, thereby supporting low-contamination removal. The material has been tested for penetration by blood and viruses in accordance with DIN EN 14126. In tests conducted in accordance with ISO 16603, the material proved impermeable to synthetic blood at test pressures ranging from 10.9 to 11.2 kPa. Furthermore, in tests conducted in accordance with ISO 16604 at 0 kPa and 10 kPa, no penetration of bacteriophages was detected.

Examples of use

PE examination gown with a barrier that is impervious to viruses, blood, and bodily fluids. The integrated Quick-Off system makes it easy to safely remove the gown after use.

The REF 621B PE lab coat is designed for applications that require reliable protection against liquids, blood, and viruses. Its well-thought-out design, featuring a Quick-Off system, facilitates safe removal and helps minimize contact with potentially contaminated surfaces.

The examination gown is made of polyethylene and is designed to be virus-, blood-, and liquid-resistant. As a Class I medical device and Category I PPE, it is suitable for use in medical and hygiene-critical areas. Long sleeves with integrated thumb holes ensure a secure fit and prevent the gown from slipping during work. The neck loop and two side ties allow for easy adjustment to the wearer. The integrated Quick-Off system enables the gown to be torn off in a controlled manner after use, thereby supporting low-contamination removal. The material has been tested for blood and virus penetration in accordance with DIN EN 14126. In tests conducted in accordance with ISO 16603, the material proved impermeable to synthetic blood at test pressures ranging from 10.9 to 11.2 kPa. Furthermore, in tests conducted in accordance with ISO 16604 at 0 kPa and 10 kPa, no penetration of bacteriophages was detected.

Examples of use

Patient shorts made of soft polypropylene nonwoven fabric for comfortable and discreet examinations. The closable Velcro flap allows for controlled access to the examination area and helps maintain patient privacy.

The OP-Shorts plus REF 713B were designed for examinations where patient comfort, privacy, and controlled access to the examination area are particularly important. The integrated Velcro flap allows the examination slit to be opened as needed and helps ensure a comfortable and dignified examination process.

The OP-Shorts Plus are classified as Category I PPE and are made of soft, skin-friendly polypropylene nonwoven fabric. The mid-length legs provide comfortable coverage while allowing for a high degree of freedom of movement. An elastic waistband made of latex-free synthetic elastomer ensures a secure and comfortable fit for various body types. Unlike the standard version, the Surgical Shorts Plus feature an examination slit with a Velcro closure that can be opened as needed and then closed again. This helps maintain patient privacy during pre- and post-examination procedures. The generous cut is designed for ambidextrous use and facilitates handling in everyday medical practice. The shorts comply with the HACCP concept and are suitable for hygiene-critical examination areas. Dermatological testing revealed no adverse reactions. The product is available in sizes One Size and XXL. The one-size-fits-all version measures 60 cm in length, 70 cm in width, and has a slit length of 22.5 cm. The XXL size measures 67 cm in length, 80 cm in width, and has a slit length of 25.5 cm.

Examples of use

Guaranteed to be slip-resistant on smooth surfaces such as PVC flooring or tiles, and made from durable, liquid-repellent coated material. Particle release has been tested in accordance with IEST-RP-CC003.5.

The DryGrip REF 902 was designed for work environments where a secure footing and reliable protection against moisture are particularly important. Its sturdy construction, featuring a waterproof and slip-resistant outer layer, ensures safe movement even on challenging surfaces.

The DryGrip is made of a spunbond polypropylene fabric with a 0.13 mm thick PE coating on the outside. This coating makes the overshoe completely waterproof, highly durable, and slip-resistant. This makes the product ideal for work environments where moisture or slippery floors pose a challenge. The flexible foot opening is ultrasonically welded and conforms snugly to the foot, ensuring a high level of comfort. The integrated elastic band made of natural rubber ensures a secure fit and makes it easy to put on and take off quickly. Thanks to its one-size-fits-all design, the DryGrip adapts to different foot shapes and can be used flexibly. The combination of a robust material construction and comfortable wear makes it a practical solution for hygiene-critical and production-related work areas.

Examples of use

The boot cover with an integrated PVC sole provides a secure fit and has been tested for slip resistance on smooth surfaces. The outer material has been treated to be antistatic and is suitable for use in sensitive areas.

The StandSafe Boot REF 977 combines reliable particle protection with superior slip resistance and was specifically designed for controlled work environments. The high shaft made of SMS material and the slip-resistant PVC sole ensure safe working conditions in cleanrooms and hygiene-critical areas.

The StandSafe Boot is made of a particle-filtering, liquid-repellent SMS material. Its multi-layered construction combines a liquid-repellent outer layer with a skin-friendly, allergen-free inner layer and a meltblown filter medium made of microfibers. This traps particles while ensuring a comfortable fit. The slip-resistant PVC sole ensures a secure footing even on smooth floor surfaces. A latex-free elastic band at the top of the shaft and an additional elastic band in the ankle area ensure a secure fit and reduce slipping during work. The upper material is electrostatic dissipative in accordance with EN 1149-1 and is therefore suitable for controlled production environments. In the Helmke Drum Test according to IEST-RP-CC003.4, the StandSafe Boot achieved Category III. For use in cleanrooms, suitability according to DIN EN ISO 14644-1 for ISO Classes 7 to 9 is recommended. The overshoe is suitable for shoe sizes 37 to 46.

Examples of use

Cleanroom overshoes made of particle-filtering SMS material for controlled and hygiene-critical work areas. The slip-resistant sole ensures a secure footing, while the material helps reduce particle contamination.

The StandSafe REF 976 combines reliable particle protection with superior slip resistance and was designed for cleanrooms and hygiene-critical work areas. The slip-resistant sole and multi-layer SMS material support safe and controlled workflows in sensitive environments.

The StandSafe is made of a particle-filtering and liquid-repellent SMS material. The design combines a liquid-repellent outer layer of polypropylene nonwoven fabric with a skin-friendly, allergen-free inner layer and a meltblown filter medium made of microfibers. This traps particles while ensuring a comfortable fit. The slip-resistant PVC sole ensures a secure grip even on smooth floor surfaces. The outer material is electrostatic dissipative in accordance with EN 1149-1 and is therefore suitable for controlled production environments. The latex-free elastic band made of synthetic elastomer ensures a secure fit and makes it easy to put on and take off. In the Helmke Drum Test according to IEST-RP-CC003.4, the StandSafe achieved Category III. For use in cleanrooms, suitability according to DIN EN ISO 14644-1 for ISO Classes 7 to 9 is recommended. The shoe cover is suitable for shoe sizes 37 to 46 and, thanks to its compact design, offers a practical solution for daily use in controlled areas. and was developed for cleanrooms and hygiene-critical work areas. The slip-resistant sole and the multi-layered SMS material support safe and controlled work processes in sensitive environments.

Examples of use

The certified chemical-resistant boot covers are made of liquid-repellent, durable SMS trilaminate and are electrostatic-dissipative. An anti-slip pattern on the sole enhances slip resistance.

The SafeGuard Boot REF 974 was designed for use in cleanrooms and controlled work environments where high particle protection, liquid resistance, and safe movement are required. The combination of certified chemical protection, low particle shedding, and a slip-resistant sole supports reliable work processes in sensitive areas.

The SafeGuard Boot is made of an antistatic-treated trilaminate composed of 100% polypropylene and meets the requirements of PPE Category III. The material, manufactured using SMS technology, is particle-filtering and liquid-repellent, and helps protect against contamination in controlled environments. Certification according to EN 13034 Type PB[6] confirms its suitability as partial-body protection against liquid chemicals with limited protective performance. Additionally, the product meets the requirements of EN 1149-5 for electrostatic properties. The anti-slip sole ensures a secure footing even on smooth floors and supports safe working in cleanrooms. The latex-free elastic ensures a secure fit and makes the boots easy to put on and take off. In the Helmke Drum Test according to IEST-RP-CC003.4, the SafeGuard boot achieved Category III, while the cleanroom classification according to IEST-RP-CC003.3 Category II enables recommended suitability for ISO cleanrooms of Classes 7 to 9. The high mechanical durability is demonstrated by test values such as an abrasion resistance of over 500 cycles, a puncture resistance of over 5 N, and a seam strength of over 75 N.

Examples of use

These low-particle film overshoes are liquid-tight and provide reliable protection in sensitive areas. Particle emission has been tested in accordance with IEST-RP-CC003.5.

The REF 941B PE shoe covers reliably protect footwear from dirt and help ensure compliance with strict hygiene standards in sensitive work environments. Their liquid-impermeable design helps reduce the introduction of contaminants and keep controlled work areas clean.

The shoe covers are made of 45-micron-thick polyethylene and form a liquid-impermeable barrier over existing footwear. The material provides reliable protection against contamination and supports hygienic work processes in production and cleanroom areas. A heat-sealed elastic band ensures a secure fit and makes them quick and easy to put on and take off. With a length of 42 cm, the shoe covers provide ample coverage for various shoe styles. The design complies with the HACCP concept and is suitable for hygiene-critical applications. In the Helmke Drum Test in accordance with IEST-RP-CC003.4, the shoe covers achieved Category I. For use in cleanrooms, suitability for DIN EN ISO 14644-1 cleanrooms of ISO classes 5 to 9 is recommended. Furthermore, no adverse reactions were observed during the dermatological compatibility test. The blue color ensures good visibility and supports compliance with workplace hygiene protocols.

Examples of use