Skip to Content
  1. Products ...
  2. Application
  3. Chemical and Cytostatic Protection

Chemical and Cytostatic Protection

Chemical protective clothing for the safe handling of liquid chemicals, cytostatic drugs, biocides, and other hazardous substances. It protects against chemical liquids, aerosols, dust, and splashes, and enables safe work procedures during the transport, mixing, filling, administration, and dilution of chemical substances.

Our products are subject to the ISO 9001 quality management system, are tested according to IEST-RP-CC003.5 in the Helmke drum test, and are classified into cleanroom suitability classes in accordance with ISO 14644. All of our personal protective equipment is certified in strict accordance with Regulation (EU) 2016/425 and is subject to continuous monitoring. We test our products designed to protect against cytostatic agents for penetration and permeation of common chemotherapy drugs. Developed for industrial, pharmaceutical, and medical work environments with heightened requirements for safety, barrier performance, and comfort.

Tight. Tested. Safe. Protection.

[256] Respirator Neolution®Air, FFP3 Bestseller

Respirator Neolution®Air, FFP3

REF 256
Our innovative filter material for the Neolution®Air respirator mask, made in Germany, ensures maximum FFP3 filtration performance with low breathing resistance and certified particle release in accordance with IEST-RP-CC003.5. The comfortable headband provides a secure fit without causing ear pain.

The highest level of respiratory protection meets medical environmental protection – the Neolution®Air respirator combines FFP3 filter performance with the requirements for Type IIR medical face masks, thereby protecting the wearer from the most hazardous aerosols whilst also protecting the environment from contamination by exhaled air.

The Neolution®Air is made from high-quality polypropylene non-woven fabric with a textile headband free from natural latex and a flexible nose clip. The high-tech FFP3-class filter material achieves an actual particle penetration rate that is many times lower than the legal requirement of a maximum of 1%, and a bacterial filtration efficiency of over 98%. It therefore protects against the most dangerous aerosols as well as bacteria and pathogens. As the mask is designed without an exhalation valve, exhaled air is expelled entirely through the filter material – a crucial advantage wherever not only the wearer but also patients, products or the sterile environment need to be protected. The three-part construction follows the natural movements of the jaw and ensures a constant, secure fit without the need for readjustment. The fabric headband does not put pressure on the ears and offers a secure hold even during prolonged wear, making it ideal for spectacle wearers. As a certified Class I medical device and PPE Category III with Helmke Drum Test Category I, the 256 meets the strictest requirements for both cleanroom and medical use.

Examples of use:
  • • Intubation of patients with infectious diseases (influenza, tuberculosis)
  • • Intubation of patients with infectious diseases (influenza, tuberculosis)
  • • Intubation of patients with infectious diseases (influenza, tuberculosis)
  • • Mold remediation
  • • Processing of powdered chemicals
  • • Livestock management in cases of suspected zoonotic diseases

→
[438/Uni] IsoCoat Chem, Type [6]-B (Uni)

IsoCoat Chem, Type [6]-B

REF 438
Partially coated protective gown with tie belt and elastic cuffs, EN 13034, EN 14126, EN 13688, EN 14325, PPE Cat. III and MD Class I, certified infection and chemical protection, material tested against cytostatic drugs.

Certified protection against chemicals and infectious agents in one – the DACH IsoCoat Chem series offers Type PB [6]-B protective gowns with reinforced sleeves and front, providing tested barrier performance for use wherever liquid chemicals and biological hazards converge.

The IsoCoat Chem protective gowns are made of a composite material of polypropylene non-woven fabric and polyethylene film on the front and sleeves, as well as polypropylene non-woven fabric on the back. This results in a gown with high chemical resistance yet equally high wearing comfort. Standards-compliant testing of chemical resistance achieved the highest protection class in all tests. Protection against infectious agents was tested according to EN 14126, also reaching high performance levels. Material testing against 7 different cytostatic drugs demonstrates that the gown provides reliable protection even with the most hazardous type of medication. As a single-use product, the gown contributes to the prevention of cross-contamination. The striking high-visibility yellow colour enables quick identification in daily work routines and reduces the risk of mix-ups. Elastic polyurethane cuffs pose no irritation potential for individuals with latex allergies and provide a secure seal at the wrist. 

Examples of use:
• Care of patients with infectious diseases
• Preparation or handling of cytostatic drugs
• Handling of infectious samples, bacterial cultures, or contaminated liquids
• Splash protection against acids, alkalis, or organic solvents


→
[571/L] Protective coverall AllSafe, Type 5+6 (L) Bestseller

Protective coverall AllSafe, Type 5+6

REF 571
Protects against chemical splashes and remains comfortable to wear thanks to its breathable material. Elastic cuffs ensure a secure fit.

The AllSafe REF 571 is designed for demanding work environments where protection against airborne particles, limited chemical splashes, and radioactive contamination from solid particles is required. The breathable, lint-free material combines high comfort with reliable protection and is also suitable for use in cleanrooms.

The protective suit is certified as Category III PPE and meets the requirements for protection types 5 and 6 according to EN ISO 13982-1 and EN 13034. It also meets the requirements of EN 1149-5 for electrostatic properties and EN 1073-2 Class 2 for protection against radioactive contamination from solid particles. In the Helmke Drum Test in accordance with IEST-RP-CC003.4, the suit achieved Category II and is recommended for cleanrooms in accordance with DIN EN ISO 14644-1, ISO Classes 6 through 9. The multi-layered ultra-fine fiber and microfiber nonwoven made of polypropylene is breathable, soft, and particularly low-lint. The ergonomic cut with long sleeves, long pant legs, and a hood ensures a high degree of freedom of movement and a secure fit. The two-way zipper with a self-adhesive cover strip extends to the chin and provides additional protection for the neck area. Elastic cuffs on the hood, sleeves, pant legs, and waist improve the fit and reduce open gaps. The high mechanical durability is demonstrated by an abrasion resistance of over 100 cycles, a flexural tear resistance of over 100,000 cycles, a puncture resistance of over 10 N, and a seam strength of over 75 N. Against sulfuric acid (30%) and sodium hydroxide (10%), repellency indices of over 95% and penetration indices of less than 1% were achieved. The suit protects the wearer from airborne particles, limited splashes, and spray mists and is suitable for single-use.

Examples of use
  • Working in cleanrooms with controlled particle levels
  • Activities involving airborne dust and particles
  • Dealing with limited chemical splashes and spray mist
  • Protective measures in nuclear and radiologically controlled environments
  • Production and packaging work in the pharmaceutical industry

→
[561/S] Protective Coverall BioSafe®, Type 4B, 5B, 6B (S) Bestseller

Protective Coverall BioSafe®, Type 4B, 5B, 6B

REF 561
Protects against chemical splashes and infectious agents. Sealed seams and a self-adhesive chin strap provide reliable protection. Knitted cuffs with thumb loops ensure a secure fit.

The BioSafe REF 561 was designed for demanding applications that require reliable protection against biological hazards, liquid chemicals, and contaminated particles. Its spray-resistant construction with taped seams provides a high level of protection and ensures safe working conditions even under challenging conditions.

The protective suit is certified as Category III PPE and meets the requirements for protection classes 4-B, 5-B, and 6-B in accordance with EN 14605, EN ISO 13982-1, EN 13034, and EN 14126. The multi-layer material combines a soft, skin-friendly non-woven fabric on the inside with a microporous PE film on the outside, which is breathable yet liquid-repellent. All seams are taped to prevent liquids from penetrating through the seams. The ergonomic cut ensures a high degree of freedom of movement, while the elastic waistband supports an optimal fit. Elastic knit cuffs with integrated thumb loops ensure a secure transition to protective gloves and minimize exposed areas. The comfortable hood is designed to fit securely even when worn with respiratory masks. The self-adhesive zipper cover with extended chin guard provides increased protection in the particularly vulnerable neck area. The high level of protection is demonstrated by a resistance to penetration by contaminated liquids containing bacteriophages of 20 kPa (EN Class 6) and a resistance to mechanically transmitted pathogens of over 75 minutes (EN Class 6). Repellency indices of over 95% and penetration indices of less than 1% were achieved against sulfuric acid (30%), sodium hydroxide (10%), and butanol. In addition, the suit meets the requirements of EN 1149-5 for electrostatic properties and EN 1073-2 for radioactive contamination from solid particles, and is recommended for ISO Class 6 to 9 cleanrooms based on the Helmke Drum Test Category II.

Examples of use
  • Handling of biological hazards and infectious materials
  • Working in Isolation and Quarantine Areas
  • Activities involving chemical splashes and spray mist
  • Working in cleanrooms in the pharmaceutical and biotechnology industries

→
[865/B/S] Disposable glove GentleSafe® EXTRA, 300 mm, Box of 100 (S, Blue) Bestseller

Disposable glove GentleSafe® EXTRA, 300 mm, Box of 100

REF 865
Disposable nitrile gloves with extra-long cuffs for enhanced protection when working with chemicals, cytostatic drugs, and biological hazards. The lightweight material provides excellent tactile sensitivity while offering a high level of protection.

The GentleSafe® EXTRA REF 865 was designed for users who need exceptionally lightweight yet reliable protection against chemicals, cytostatic drugs, and biological hazards. The extra-long design provides additional protection for the wrist and forearm, combining high comfort with excellent dexterity.

These powder-free and latex-free disposable gloves are made of carboxylated nitrile-butadiene rubber and are classified as both Category III PPE and a Class I medical device. The extra-long version, measuring 308 mm in length, offers additional protection against chemicals and liquids. Despite its lightweight material, the glove provides maximum dexterity (Level 5 according to EN ISO 21420) and excellent tactile sensitivity. The textured fingertips ensure a secure grip, even when handling damp or wet objects. The glove meets the requirements of EN ISO 374-1 Type B and provides protection against chemicals, viruses, bacteria, and fungi in accordance with EN ISO 374-5. It achieves protection level 6 against 40% sodium hydroxide, protection level 2 against 30% hydrogen peroxide, and protection level 3 against 37% formaldehyde. Resistance to numerous cytostatic agents was tested according to ASTM D6978-05; breakthrough times of over 240 minutes were demonstrated for active ingredients such as cisplatin, cyclophosphamide, dacarbazine, doxorubicin HCl, etoposide, fluorouracil, methotrexate, mitomycin C, paclitaxel, and vincristine. With a finger thickness of 0.10 mm, the glove combines a sensitive sense of touch with reliable protection. Additionally, it is suitable for food contact in accordance with Regulation (EC) No. 1935/2004 and is free of natural latex, carbamates, thiurams, and thiazoles. It is available in blue, white, and black, as well as in sizes XS through XXL.

Examples of use
  • Preparation and Administration of Anticancer Drugs
  • Handling Chemicals, Acids, and Bases
  • Laboratory analyses and sample handling
  • Cleaning and Disinfection
  • Food Processing and Quality Control

→
[863/B/S] Disposable glove GentleSafe® Nitrile, 240 mm, box of 100 (S, Blue) Bestseller

Disposable glove GentleSafe® Nitrile, 240 mm, box of 100

REF 863
Disposable nitrile gloves offering superior comfort and excellent tactile sensitivity for precise work in medical, laboratory, and industrial settings. The textured fingertips provide a secure grip while ensuring reliable protection against chemicals and biological hazards.

The GentleSafe® Nitrile REF 863 combines superior comfort, excellent tactile sensitivity, and reliable protection for everyday use in medical, laboratory, and industrial settings. The material’s high elasticity and lightweight design allow for fatigue-free work, even during extended wear.

These powder-free and latex-free disposable gloves are made of carboxylated nitrile-butadiene rubber and are classified as both Category III PPE and a Class I medical device. The textured surface on the fingertips ensures a secure grip, even when handling wet or damp objects. Thanks to its high elasticity, the glove offers maximum dexterity (Level 5 according to EN ISO 21420) and supports precise work with excellent tactile sensitivity. The glove is liquid-impermeable and provides protection against chemicals, viruses, bacteria, and fungi in accordance with EN ISO 374-5. It achieves protection level 6 against 40% sodium hydroxide, protection level 2 against 30% hydrogen peroxide, and protection level 3 against 37% formaldehyde. Resistance to numerous cytostatic agents was tested according to ASTM D6978-05; for active ingredients such as cisplatin, cyclophosphamide, dacarbazine, doxorubicin HCl, etoposide, fluorouracil, methotrexate, mitomycin C, paclitaxel, and vincristine sulfate, no breakthrough was detected within 240 minutes. With a finger thickness of just 0.10 mm, a length of 246 mm, and a tensile strength of at least 14 MPa before and after aging, the glove combines high protection with excellent comfort. In addition, it is suitable for food contact in accordance with Regulation (EC) No. 1935/2004 and is free of natural latex, carbamates, thiurams, and thiazoles. The glove is available in blue, white, and black, as well as in sizes XS through XXL.

Examples of use
  • Diagnostic and nursing activities in the healthcare sector
  • Laboratory analyses and sample handling
  • Handling Chemicals and Disinfectants
  • Food Processing and Quality Control
  • Cleaning and decontamination work

→
[973] Shoe cover SafeGuard, Type PB [6] Bestseller

Shoe cover SafeGuard, Type PB [6]

REF 973
Cleanroom overshoes made of particle-filtering trilaminate for controlled production and work areas. The slip-resistant sole and liquid-repellent material promote safety and contamination control in the cleanroom.

The SafeGuard REF 973 was designed for cleanrooms and controlled production areas where high particle protection, liquid resistance, and reliable footwear protection are required. The combination of certified chemical protection, low particle shedding, and a slip-resistant sole supports safe and controlled workflows in sensitive environments.

The SafeGuard is made of an antistatic-treated trilaminate composed of 100% polypropylene and meets the requirements of PPE Category III. The material, manufactured using SMS technology, is particle-filtering and liquid-repellent, helping to reduce contamination in controlled areas. Certification according to EN 13034 Type PB[6] confirms its suitability as partial body protection against liquid chemicals with limited protective performance. Additionally, the product meets the requirements of EN 1149-5 for electrostatic properties. The anti-slip sole ensures a secure footing even on smooth floors and supports safe working in cleanrooms. The latex-free elastic ensures a secure fit and high comfort. The cleanroom classification according to IEST-RP-CC003.3 Category II allows for recommended use in ISO cleanrooms of Classes 7 to 9. The high mechanical durability is demonstrated by an abrasion resistance of over 500 cycles, a puncture resistance of over 5 N, and a seam strength of over 75 N. The shoe cover is suitable for shoe sizes 38 to 45.

Examples of use
  • Working in cleanroom airlocks and controlled production areas
  • Transfer of materials and personnel between cleanroom zones
  • Production work in medical technology and electronics manufacturing
  • Work in laboratories and biotechnology facilities
  • Chemical handling with limited exposure

→
[9079/M] Infection protection kit (M) Bestseller

Infection protection kit

REF 9079
Protective kit including 1 x Type 3B coverall, 1 x FFP3 NR D respirator with valves, 3 pairs of gloves, 1 x goggles, 1 pair of boot covers, 1 x adhesive tape, 1 x disposal bag with cable ties.

Complete protection for emergencies: the DACH Infection Control Kit combines all the necessary components for safely managing highly infectious situations in a well-designed, comprehensive package that provides reliable protection for medical staff and emergency services personnel from head to toe.

The infection control kit combines seven coordinated protective components to form a complete set of equipment for use in highly infectious environments. At the heart of the kit is the Type 3B/4B/5B/6B chemical protection suit, which, when used in combination with the FFP3 respirator, full-view safety goggles, disposable gloves and boot covers, ensures seamless, all-round protection from head to toe. This robust duct tape allows for the secure sealing of joints between individual protective components, such as at sleeve and leg cuffs, thereby preventing any unprotected areas throughout the entire operation. After use, the biohazard disposal bag is sealed with cable ties to ensure the safe and compliant disposal of contaminated materials. 

Examples of use:
• Care for highly infectious patients in hospitals and isolation wards
• Ambulance services and emergency response operations involving unknown or highly infectious hazardous substances
• Biological hazard response and decontamination operations
• Care homes in the event of an outbreak or highly contagious diseases

Can’t find the right set for you? No problem! We’d be happy to put together bespoke sets for you, perfectly tailored to your needs. 
→
[257VPS/W] Respirator Neolution®Air Loop, FFP3, sterile

Respirator Neolution®Air Loop, FFP3, sterile

REF 257VPS/W
Sterilized FFP2 mask, made in Germany. Our innovative filter material for the Neolution®Air Loop respirator ensures low breathing resistance. The covered exhalation valve prevents heat and moisture buildup. Convenient ear loops make it easy to wear.

The flagship product of the Neolution®Air Loop family: the sterilized Neolution®Air Loop with a covered valve combines maximum FFP3 protection, a filtered exhalation valve, and validated ethylene oxide sterilization in a single-use, individually packaged mask, thereby setting the highest possible standard for aseptic processes, cleanrooms, and surgical applications where the focus is on the wearer, the environment, and the product.

The sterilized Neolution®Air Loop with a covered valve is made of high-quality polypropylene nonwoven fabric and features natural latex-free ear loops, a flexible nose clip, a polypropylene exhalation valve, and a filtering meltblown valve cover – sterilized according to ISO 11135 using a validated ethylene oxide process with a proven microbial reduction of at least 6 log. The high-tech FFP3-class filter material achieves an actual particle penetration rate that is many times lower than the legal requirement of max. 1% and a bacterial filtration efficiency greater than 98%. The filtered exhalation valve noticeably reduces heat and moisture buildup, while the filtering valve cover simultaneously traps germs and droplets from exhaled air—a protective concept that safeguards both the wearer and the surrounding environment. Each mask is delivered individually packaged to maintain sterility without compromise until the moment of use. The three-part design follows the natural movements of the jaw and ensures a consistently tight fit without the need for readjustment; the wide ear loops do not dig in, even after long shifts. Scientifically proven skin compatibility according to EN ISO 10993 and a passed dolomite dust retention test complete the unique performance profile of this mask.

Examples of use:
  • • Manufacture of pharmaceuticals
  • • Medical procedures involving patients with infectious diseases
  • • Manufacture of cytostatic drugs
  • • Working in biological laboratories
  • • Manufacture of medical devices

→
[256VPS/W] Respirator Neolution®Air, FFP3, sterile

Respirator Neolution®Air, FFP3, sterile

REF 256VPS/W
Sterilised FFP3 mask, made in Germany. Our innovative filter material for the Neolution®Air respirator ensures low breathing resistance. The covered exhalation valve prevents heat and moisture build-up. The comfortable headband provides a secure fit without causing ear pain.

The flagship product of the Neolution®Air range – the sterilised Neolution®Air with a covered valve – combines maximum FFP3 protection, a filtered exhalation valve and validated ethylene oxide sterilisation in a single-packed, disposable mask, thereby setting the highest possible standard for aseptic processes, cleanrooms and surgical applications where the focus is on the wearer, the environment and the product.

The sterilised Neolution®Air with a covered valve is made from high-quality polypropylene non-woven fabric, featuring a textile headband free from natural latex, a flexible nose clip, an exhalation valve and a filtering meltblown valve cover. It is sterilised in accordance with ISO 11135 using a validated ethylene oxide process with a proven germ reduction of at least 6 log. The high-tech FFP3-class filter material achieves an actual particle penetration rate that is many times lower than the legal requirement of max. 1% and a bacterial filtration efficiency of over 98%. The filtered exhalation valve noticeably reduces heat and moisture build-up, whilst the filtering valve cover simultaneously retains germs and droplets from the exhaled air – a protection concept that safeguards both the wearer and the environment. Each mask is supplied individually packaged to maintain sterility without compromise until the moment of use. The three-part design follows the natural movements of the jaw and ensures a constant, secure fit without the need for readjustment. The fabric headband does not put pressure on the ears and offers a secure hold even during prolonged wear, making it ideal for spectacle wearers. Scientifically proven skin compatibility in accordance with EN ISO 10993 and a passed dolomite dust retention test complete the unique performance profile of this mask.

Examples of use:
  • • Manufacture of pharmaceuticals
  • • Medical procedures involving patients with infectious diseases
  • • Manufacture of cytostatic drugs
  • • Working in biological laboratories
  • • Manufacture of medical devices

→
[257S/W] Respirator Neolution®Air Loop, FFP3, sterile

Respirator Neolution®Air Loop, FFP3, sterile

REF 257S/W
Sterilised FFP3 mask, Made in Germany. Our innovative filter material for the Neolution®Air Loop respirator ensures low breathing resistance and particle filtration performance tested in accordance with IEST-RP-CC003.5. Practical ear loops make it easy to use.

FFP3 maximum protection, supplied sterile and with no compromise on environmental protection – the DACH Neolution®Air Loop 257S/W combines validated ethylene oxide sterilisation with FFP3 filter performance, thereby providing the highest possible level of protection for the wearer, the environment and the product in aseptic processes and high-risk areas.

The Neolution®Air Loop 257S/W is made from high-quality polypropylene non-woven fabric with ear loops free from natural latex and a flexible nose clip – sterilised in accordance with ISO 11135 using a validated ethylene oxide process with a proven bacterial reduction of at least 6 log. The high-tech FFP3-class filter material achieves an actual particle penetration rate that is many times lower than the legal requirement of max. 1% and a bacterial filtration efficiency of over 98%. It therefore protects against the most dangerous aerosols as well as bacteria and pathogens. All exhaled air is completely expelled through the filter material, making this variant the first choice wherever both environmental protection and wearer protection are required at the highest level. Each mask is supplied individually packaged to maintain sterility without compromise until use. The three-part design follows the natural movements of the jaw and ensures a constant, secure fit without the need for readjustment; the wide ear loops do not cut into the skin, even after prolonged wear. Scientifically proven skin compatibility in accordance with EN ISO 10993 and a passed dolomite dust retention test complete the performance profile of this exceptional disposable mask.

Examples of use:
  • • Manufacture of pharmaceuticals
  • • Medical procedures involving patients with infectious diseases
  • • Manufacture of cytostatic drugs
  • • Working in biological laboratories
  • • Manufacture of medical devices

→
[256S/W] Respirator Neolution®Air, FFP3, sterile

Respirator Neolution®Air, FFP3, sterile

REF 256S/W
Sterilised FFP3 mask, made in Germany. Our innovative filter material for the Neolution®Air respirator ensures low breathing resistance and particle filtration performance tested in accordance with IEST-RP-CC003.5. The comfortable headband provides a secure fit without causing ear pain.

FFP3 maximum protection, supplied sterile and with no compromise on environmental protection – the Neolution®Air combines validated ethylene oxide sterilisation with FFP3 filter performance, thereby providing the highest possible level of protection for the wearer, the environment and the product in aseptic processes and high-risk areas.

The Neolution®Air is made from high-quality polypropylene non-woven fabric, featuring a textile headband free from natural latex and a flexible nose clip. It is sterilised in accordance with ISO 11135 using a validated ethylene oxide process, with a proven bacterial reduction of at least 6 log. The high-tech FFP3-class filter material achieves an actual particle penetration rate that is many times lower than the legal requirement of max. 1% and a bacterial filtration efficiency of over 98%. It therefore protects against the most dangerous aerosols as well as bacteria and pathogens. All exhaled air is completely expelled through the filter material, making this variant the first choice wherever both environmental protection and wearer protection are required at the highest level. Each mask is supplied individually packaged to maintain sterility without compromise until use. The three-part design follows the natural movements of the jaw and ensures a constant, tight fit without the need for readjustment. The fabric headband does not put pressure on the ears and offers a secure fit even during prolonged wear, making it ideal for spectacle wearers. Scientifically proven skin compatibility in accordance with EN ISO 10993 and a passed dolomite dust retention test complete the performance profile of this exceptional disposable mask.

Examples of use:
  • • Manufacture of pharmaceuticals
  • • Medical procedures involving patients with infectious diseases
  • • Manufacture of cytostatic drugs
  • • Working in biological laboratories
  • • Manufacture of medical devices

→
[257VP] Respirator Neolution®Air Loop, FFP3

Respirator Neolution®Air Loop, FFP3

REF 257VP
Our innovative filter material for the Made-in-Germany Neolution®Air Loop respirator ensures maximum FFP3 filtration performance with low breathing resistance and tested particle shedding in accordance with IEST-RP-CC003.5. Features a covered exhalation valve for maximum safety and comfort. Designed for industrial and medical use.

The pinnacle of the Neolution®Air Loop family—the Neolution®Air Loop with a covered exhalation valve combines FFP3-level protection, a filtered exhalation valve, and medical Type IIR certification in a single disposable mask, offering maximum protection for the wearer and the surrounding environment while providing exceptional comfort for the most demanding cleanroom and medical applications.

The Neolution®Air Loop with a covered valve is made of high-quality polypropylene nonwoven fabric and features wide, natural latex-free ear loops, a flexible nose clip, and an exhalation valve with a filtering meltblown cover. The high-tech FFP3-class filter material achieves an actual particle penetration rate that is many times lower than the legal requirement of max. 1% and a bacterial filtration efficiency greater than 98%. It thus protects against the most dangerous aerosols as well as bacteria and pathogens. The covered exhalation valve is the key difference: It noticeably reduces heat and moisture buildup and, thanks to the filtering valve cover, simultaneously protects the surrounding area from germs and droplets—a feature that conventional valve masks do not offer. The mask is therefore comfortable to wear even during physically demanding activities or when working for hours on end. The three-part design follows the natural movements of the jaw and ensures a consistently tight seal; the wide ear loops do not dig in, even after long shifts. As a Class I medical device and PPE Category III certified to Helmke Drum Test Category I, the 257VP meets the strictest requirements for both cleanroom and medical use.

Examples of use:
  • • Intubation of patients with infectious diseases (influenza, tuberculosis)
  • • Ebola First Aid
  • • Manufacture of cytotoxic drugs
  • • Mold remediation
  • • Processing of powdered chemicals
  • • Livestock management in cases of suspected zoonotic diseases

→
[256VP] Respirator Neolution®Air, FFP3

Respirator Neolution®Air, FFP3

REF 256VP
Our innovative filter material for the Neolution®Air respirator mask, made in Germany, ensures maximum FFP3 filtration performance with low breathing resistance and certified particle release in accordance with IEST-RP-CC003.5. Features a covered exhalation valve for maximum safety and comfort. Designed for industrial and medical use.

The pinnacle of the Neolution®Air range – the Neolution®Air with a covered exhalation valve combines FFP3 maximum protection, a filtered exhalation valve and medical Type IIR certification in a single disposable mask, thereby offering maximum protection for the wearer and the surrounding environment whilst ensuring outstanding comfort for the most demanding cleanroom and medical applications.

The Neolution®Air with a covered valve is made from high-quality polypropylene non-woven fabric, featuring a textile headband free from natural latex, a flexible nose clip, an exhalation valve and a filtering meltblown valve cover. The high-tech FFP3-class filter material achieves an actual particle penetration rate that is many times lower than the legal requirement of max. 1% and a bacterial filtration efficiency of over 98%. It therefore protects against the most dangerous aerosols as well as bacteria and pathogens. The covered exhalation valve is the key difference: it noticeably reduces heat and moisture build-up and, thanks to the filtering valve cover, simultaneously protects the surrounding area from germs and droplets – a feature not offered by conventional valve masks. The mask is therefore comfortable to wear even during physically demanding activities or when worn for hours on end. The three-part design follows the natural movements of the jaw and ensures a consistently secure fit. The fabric headband does not put pressure on the ears and offers a secure hold even during prolonged wear, making it ideal for spectacle wearers. As an approved Class I medical device and PPE Category III with Helmke Drum Test Category I, the 256VP meets the strictest requirements for both cleanroom and medical use.

Examples of use:
  • • Intubation of patients with infectious diseases (influenza, tuberculosis)
  • • Ebola First Aid
  • • Manufacture of cytotoxic drugs
  • • Mold remediation
  • • Processing of powdered chemicals
  • • Livestock management in cases of suspected zoonotic diseases

→
[257-3] Respirator Neolution®Air Loop, FFP3, 3pc. set

Respirator Neolution®Air Loop, FFP3, 3pc. set

REF 257-3
Our innovative filter material for the Made-in-Germany Neolution®Air Loop respirator ensures maximum FFP3 filtration performance with low breathing resistance and particle release tested in accordance with IEST-RP-CC003.5. Convenient ear loops make it easy to use.

The highest level of respiratory protection meets medical environmental protection—the Neolution®Air Loop respirator combines FFP3 filter performance with the requirements for Type IIR medical face masks, thereby protecting the wearer from the most dangerous aerosols while also preventing the environment from being contaminated by exhaled air.

The Neolution®Air Loop is made of high-quality polypropylene nonwoven fabric with natural latex-free ear loops and a flexible nose clip. The high-tech FFP3-class filter material achieves an actual particle penetration rate that is many times lower than the legal requirement of a maximum of 1% and a bacterial filtration efficiency of over 98%. It thus protects against the most dangerous aerosols as well as bacteria and pathogens. Since the mask is designed without an exhalation valve, exhaled air is completely expelled through the filter material—a decisive advantage wherever not only the wearer but also patients, products, or the sterile environment must be protected. The three-part design follows the natural movements of the jaw and ensures a consistently tight fit without the need for readjustment; the wide ear loops do not dig in even after hours of wear. As a Class I medical device and PPE Category III certified with Helmke Drum Test Category I, the 257 meets the strictest requirements for both cleanroom and medical use.

Examples of use
  • • Intubation of patients with infectious diseases (influenza, tuberculosis)
  • • Ebola First Aid
  • • Manufacture of anticancer drugs
  • • Remediation work for mold infestations
  • • Processing of powdered chemicals
  • • Livestock management in cases of suspected zoonotic diseases

→
[257] Respirator Neolution®Air Loop, FFP3

Respirator Neolution®Air Loop, FFP3

REF 257
Our innovative filter material for the Made-in-Germany Neolution®Air Loop respirator ensures maximum FFP3 filtration performance with low breathing resistance and tested particle shedding in accordance with IEST-RP-CC003.5. Convenient ear loops make it easy to use.

The highest level of respiratory protection meets medical environmental protection—the Neolution®Air Loop respirator combines FFP3 filter performance with the requirements for Type IIR medical face masks, thereby protecting the wearer from the most dangerous aerosols while also protecting the environment from contamination by exhaled air.

The Neolution®Air Loop is made of high-quality polypropylene nonwoven fabric with natural latex-free ear loops and a flexible nose clip. The high-tech FFP3-class filter material achieves an actual particle penetration rate that is many times lower than the legal requirement of a maximum of 1% and a bacterial filtration efficiency of over 98%. It thus protects against the most dangerous aerosols as well as bacteria and pathogens. Since the mask is designed without an exhalation valve, exhaled air is completely expelled through the filter material—a decisive advantage wherever not only the wearer but also patients, products, or the sterile environment must be protected. The three-part design follows the natural movements of the jaw and ensures a consistently tight fit without the need for readjustment; the wide ear loops do not dig in even after hours of wear. As a Class I medical device and PPE Category III certified with Helmke Drum Test Category I, the 257 meets the strictest requirements for both cleanroom and medical use.

Examples of use:
  • • Intubation of patients with infectious diseases (influenza, tuberculosis)
  • • Ebola First Aid
  • • Manufacture of cytotoxic drugs
  • • Mold remediation
  • • Processing of powdered chemicals
  • • Livestock management in cases of suspected zoonotic diseases

→
[273/M] Respirator ubiQ®³, FFP3 (M)

Respirator ubiQ®³, FFP3

REF 273
Thanks to its duckbill-shaped design, the respirator mask offers a comfortably large breathing volume. Textile head straps ensure a secure fit without tugging at the hair, whilst the very low breathing resistance makes it extremely comfortable to wear.

Maximum FFP3 filtration performance in a space-saving design: with its distinctive ‘duckbill’ shape, the ubiQ³® offers exceptional respiratory protection with a breathing resistance that is many times lower than the standard requirements, thereby combining safety, comfort and ease of use in a single mask.

The ubiQ³® is made from high-quality polypropylene non-woven fabric with a polypropylene microfibre filter medium, a flexible, plastic-coated nose clip and a textile headband free from natural latex. The high-performance filter achieves an actual particle penetration rate that is well below the maximum permissible limits, thereby offering the highest level of safety. With a breathing resistance of barely one-sixth of the permissible limit, the mask allows for exceptionally easy, fatigue-free breathing, even during intense physical work or when worn for long periods. The distinctive ‘duckbill’ shape makes it easy to put on, whilst also allowing for particularly space-saving storage and convenient transport, for example in bags or first-aid kits. The mouldable nose clip ensures the mask fits snugly around the bridge of the nose. Scientifically proven skin compatibility in accordance with EN ISO 10993 and a successful dolomite dust retention test round off the outstanding performance profile of this mask, made in Germany.

Examples of use:
• Healthcare facilities requiring FFP3 protection and Type IIR certification
• Cleanroom and pharmaceutical applications
• Industry and the skilled trades where there are high levels of particulate matter or aerosols
• Mobile operations and first-aid equipment thanks to space-saving storage

→
[572/M] Protective Coverall AllSafe+, Type 5B, 6B (M)

Protective Coverall AllSafe+, Type 5B, 6B

REF 572

Protects against chemical splashes and infectious agents, and remains comfortable to wear thanks to its breathable material. Elastic cuffs ensure a secure fit.

The AllSafe+ REF 572 was developed for demanding applications where protection against solid particles, infectious agents, and limited chemical splashes is required. The combination of high protection, breathable material, and an ergonomic fit ensures safe and comfortable work, even during extended use.

The protective coverall is certified as Category III PPE and meets the requirements for protection types 5-B and 6-B according to EN ISO 13982-1, EN 13034, and EN 14126. The multi-layer material combines a soft, skin-friendly nonwoven fabric on the inside with a microporous PE film on the outside, which is breathable yet liquid-repellent. The ergonomic cut with long sleeves, long pant legs, and a hood ensures a high degree of freedom of movement and a secure fit. The two-way zipper with a self-adhesive cover extends to the chin and provides additional protection for the neck area. Elastic on the hood, sleeves, pant legs, and waist improve the fit and minimize open gaps. The material is particularly lint-free, making it suitable for sensitive work environments. The material has been extensively tested for mechanical durability. Protection against chemicals and infectious agents is verified by standard-compliant tests. Additionally, the suit meets the requirements of EN 1149-5 for electrostatic properties and EN 1073-2 for protection against radioactive contamination from solid particles.

Examples of use
  • Handling of infectious materials and biological hazards
  • Cleaning and decontamination procedures
  • Working in environments with limited exposure to chemical splashes and spray mist
  • Protective measures in nuclear and radiologically controlled environments

→
[44B01/WT/M] Protective gown IsoCoat 360 4B, Type PB [4]-B (M)

Protective gown IsoCoat 360 4B, Type PB [4]-B

REF 44B01
This certified lab coat provides protection against chemicals and infectious agents and is spray-resistant. Sealed seams and an extra-wide waistband ensure a secure fit.

The IsoCoat 360 4B REF 44B01/WT is designed for particularly demanding work environments where comprehensive protection against liquid chemicals and biological hazards is required. The all-around protection covering the front and back, as well as the taped seams, provide a high level of protection even under heavy use.

The protective gown is made of PP nonwoven fabric with a microporous PE coating and is classified as both Category III PPE and a Class I medical device. Certification according to EN 14605 Type PB [4]-B confirms protection against liquid chemicals in the form of spray mists, while EN 14126 verifies protection against blood, viruses, bacteria, contaminated particles, and liquid aerosols. All seams are taped to ensure a high level of impermeability. The neck closure, elastic latex-free knitted cuffs, and a tie belt ensure a secure fit and reliable coverage, even when worn with protective gloves. In the Helmke Drum Test according to IEST-RP-CC003.4, the material achieved Category III and is recommended for cleanrooms in accordance with DIN EN ISO 14644-1, ISO Classes 7 to 9. Its high mechanical strength is demonstrated by an abrasion resistance of over 500 cycles, a flexural tear resistance of 100,000 cycles, a puncture resistance of over 10 N, and a seam strength of over 75 N. Against sulfuric acid (30%), sodium hydroxide (10%), o-xylene, and butan-1-ol, repellency indices of over 95% and penetration indices of under 1% were achieved in each case. In terms of protection against infectious agents, resistance to the penetration of contaminated liquids containing bacteriophages of 20 kPa (EN Class 6) and resistance to mechanically transmitted infectious agents for over 75 minutes (EN Class 6) were demonstrated, among other things.

Examples of use
  • Care for patients with suspected infectious diseases
  • Activities in isolation and quarantine areas
  • Working in microbiology laboratories
  • Handling of Biological Hazardous Substances in Biotechnology
  • Cleaning and decontamination work in contaminated areas
  • Activities involving spray mist or liquid chemicals
  • Emergency medical service operations under heightened infection control requirements

→
[435/M] Protective gown IsoCoat Zytex®, Type PB [6]-B (M)

Protective gown IsoCoat Zytex®, Type PB [6]-B

REF 435
Protective gowns for handling cytostatic drugs and for applications with heightened infection control requirements. The Zytex® material provides a reliable barrier against contaminated liquids, particles, and biological hazards.

The IsoCoat Zytex® REF 435 was developed for demanding applications where infection control and the safe handling of cytostatic drugs are paramount. Its all-around protective design and specially developed Zytex® material provide a reliable barrier in sensitive medical and pharmaceutical work areas.

The protective gown is made of an SMS-PP nonwoven fabric with a PE coating and is classified as both Category III PPE and a Class I medical device. Certification according to EN 13034 Type PB [6]-B confirms protection against liquid chemicals with limited protective performance, while EN 14126 verifies protection against blood, viruses, bacteria, contaminated particles, and liquid aerosols. The material was additionally tested for the permeation of cytostatic drugs in accordance with EN ISO 6529 and achieved a breakthrough time of over 480 minutes (EN Class 6) for cytostatic drugs (5 mg/ml). The gown is fastened at the neck with ties, while latex-free elastic knit cuffs and a drawstring belt ensure a secure fit and reliable coverage. Its high mechanical strength is demonstrated by a flexural tear resistance of 100,000 cycles, a tear strength of over 30 N, and a seam strength of over 50 N. Against 30% sulfuric acid and 10% sodium hydroxide, repellency indices of over 90% and penetration indices of less than 1% were achieved. In the area of infection control, resistance to the penetration of infectious agents through mechanical contact for over 75 minutes (EN Class 6) was demonstrated, among other things. The lab coat is expressly not suitable for handling o-xylene, butan-1-ol, or other organic chemicals.

Examples of use
  • Preparation and Reconstitution of Antineoplastic Drugs
  • Administration of chemotherapy drugs by healthcare professionals
  • Work in oncology outpatient clinics and wards
  • Precautions for MRSA or Norovirus Management
  • Working in Cleanrooms in the Pharmaceutical Industry

→